Study on Hot Deformation Processing Map of Super Martensitic Stainless Steel SUP13 Cr5Ni2Mo for Oil-Gas Field

方旭东; 王岩; 夏炎; 李莎; 李阳

您当前的位置：

首页 >

文章列表页 >

Study on Hot Deformation Processing Map of Super Martensitic Stainless Steel SUP13 Cr5Ni2Mo for Oil-Gas Field

更新时间：2026-01-21

- Study on Hot Deformation Processing Map of Super Martensitic Stainless Steel SUP13 Cr5Ni2Mo for Oil-Gas Field
- Special Steel Vol. 39, Issue 5, Pages: 1-4(2018)
- 作者机构：
  
  1. 太原钢铁(集团)有限公司先进不锈钢材料国家重点实验室,太原,030003
  2. 山西太钢不锈钢股份有限公司技术中心,太原,030003
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Received：10 April 2018，
  
  Online First：27 May 2022，
  
  Published：27 May 2018
- 稿件说明：
移动端阅览
方旭东, 王岩, 夏炎, et al. Study on Hot Deformation Processing Map of Super Martensitic Stainless Steel SUP13 Cr5Ni2Mo for Oil-Gas Field[J]. Special Steel, 2018, 39(5): 1-4.
DOI：

方旭东, 王岩, 夏炎, et al. Study on Hot Deformation Processing Map of Super Martensitic Stainless Steel SUP13 Cr5Ni2Mo for Oil-Gas Field[J]. Special Steel, 2018, 39(5): 1-4. DOI：

摘要

在Gleeble-3800热模拟试验机上

研究了SUP13Cr5Ni2Mo合金的热塑性及热变形行为

并建立了合金的热加工图。结果表明

在900～1 300℃

合金均具有较好的热塑性;通过热加工图分析得出

合金适宜初始加工温度范围在1 100～1 200℃

采用此参数变形获得的组织细小均匀。

Abstract

The thermo plastic and thermo deformation characteristics of SUP13Cr5Ni2Mo alloy were studied by using Gleeble-3800 thermal simulation test machine

and the hot processing maps were established. The results show that： In the range of 900 ~ 1 300°C

the alloys have good thermoplastic ；The suitable processing of initial in a temperature range between 1 100 ~ 1 200 °C through hot processing map analysis

and the deformation microstructure sample is fine and uniform by using this parameters.

关键词

Keywords

references

Views

下载量

CSCD

CNKI被引量

Alert me when the article has been cited

提交

Tools

Publicity Resources

No data

Related Author

No data

Related Institution

No data

⁰