Structure and Characteristics of Special Steel RL40 for Flexspline of Harmonic Reduction Gear
|更新时间:2026-01-21
|
Structure and Characteristics of Special Steel RL40 for Flexspline of Harmonic Reduction Gear
Special SteelVol. 42, Issue 3, Pages: 76-78(2021)
作者机构:
1. 北京中技克美谐波传动股份有限公司
2. 北京科技大学材料科学与工程学院
3. 西宁特殊钢股份有限公司
作者简介:
基金信息:
DOI:
CLC:
Received:04 October 2020,
Online First:15 March 2022,
Published:15 March 2021
稿件说明:
移动端阅览
王洋, 王欢, 张朝磊, et al. Structure and Characteristics of Special Steel RL40 for Flexspline of Harmonic Reduction Gear[J]. Special Steel, 2021, 42(3): 76-78.
DOI:
王洋, 王欢, 张朝磊, et al. Structure and Characteristics of Special Steel RL40 for Flexspline of Harmonic Reduction Gear[J]. Special Steel, 2021, 42(3): 76-78.DOI:
Structure and Characteristics of Special Steel RL40 for Flexspline of Harmonic Reduction Gear
austenite grain coarsening and phase transformation point of RL40 steel for flexpline (/% :0.40C
0.90Cr
l. 85Ni
0.25Mo
0.05Nb
0.016Ti) has been studied by the quantitative analysis of optical microscopy and thermal expansion experiment. The results show that the microstructure of the rolled bar is bainite + martensite
the average grain size of primary austenite is 14. 0 μm
and the austenite grain size rating is 9. 0 ~ 9. 5
and the average standard deviation is 0. 46 ~ 0. 048. The transformation point Ac
1
is 729 ℃
Ac
3
is 769 ℃
Ms is 28 ℃
and the austenite grain coarsening temperature is 1 000 ℃.