Application of Particle Injection Dephosphorization Process on Steelmaking of 130 t Electric Arc Furnace

陈军召; 张彦辉; 谈岸童; 李立凯; 康建光

doi:10.20057/j.1003-8620.2022-00073

您当前的位置：

首页 >

文章列表页 >

Application of Particle Injection Dephosphorization Process on Steelmaking of 130 t Electric Arc Furnace

更新时间：2026-01-21

- Application of Particle Injection Dephosphorization Process on Steelmaking of 130 t Electric Arc Furnace
- Special Steel Vol. 44, Issue 1, Pages: 34-38(2023)
- 作者机构：
  
  1. 中天钢铁集团有限公司,常州,213000
  2. 新三洲特钢有限公司,无锡,214181
  3. 东方特钢有限公司,常州,213100
- 作者简介：
- 基金信息：
- DOI：10.20057/j.1003-8620.2022-00073
  CLC：
- Received：08 August 2022，
  
  Online First：30 January 2023，
  
  Published：30 January 2023
- 稿件说明：
移动端阅览
陈军召, 张彦辉, 谈岸童, et al. Application of Particle Injection Dephosphorization Process on Steelmaking of 130 t Electric Arc Furnace[J]. Special Steel, 2023, 44(1): 34-38.
DOI：

陈军召, 张彦辉, 谈岸童, et al. Application of Particle Injection Dephosphorization Process on Steelmaking of 130 t Electric Arc Furnace[J]. Special Steel, 2023, 44(1): 34-38. DOI： 10.20057/j.1003-8620.2022-00073.

摘要

在130 t电弧炉上进行了复合喷吹剂喷吹微粒脱磷的实践应用。设计了电弧炉氧化期脱磷渣系的组成，炉渣碱度控制在2.2～2.8

氧化铁含量控制在15%～20%。并以氮气为载体喷吹按照一定比例配制的碳粉(15%～20%) 、CaO粉(40%～60%) 、MgO粉(25%～30%) 、CaC粉(5%～10%)的复合粉剂。40Cr、45钢、20CrMnTi和60Si2Mn等钢采用喷吹复合喷吹剂冶炼工艺后，加快了熔剂的反应面积，提高了成渣速度，各项生产指标得到了改善，其中吨钢电耗降低90 kWh/t

吨钢钢铁料消耗降低9.3 kg/t

吨钢熔剂消耗减少4.8 kg/t

生产率提高5%～6%

吨钢综合生产成本降低了25元/t。

Abstract

The practical application of particle dephosphorization with compound injection agent on 130 t electric arc furnace is carried out. The composition of dephosphorization slag system in the oxidation period of electric furnace is designed

basicity of slag is controlled between 2.2-2. 8

and the content of iron oxide is controlled between 15% -20%. The composite powder of carbon powder (15% -20%)

CaO powder (40% -60%)

MgO powder (25% -30%) and CaC powder (5% - 10%) prepared in a certain proportion is injected with nitrogen as the carrier. After adopting the smelting process of injection compound injection agent on EAF steelmaking of 40Cr

0.45C steel

20CrMnTi and 60Si

Mn etc alloy steels

the reaction area of flux is accelerated

the slag forming speed is

improved

and various production indexes are improved. Among them

the power consumption per ton steel is reduced by 90 kWh/t

the steel material consumption per ton steel is reduced by 9. 3 kg/t

the flux consumption per ton steel is reduced by 4. 8 kg/t

the productivity is increased by 5% -6%

and the comprehensive production cost per ton of steel is reduced by 25 yuan/t.

关键词

Keywords

references

Views

下载量

CSCD

CNKI被引量

Alert me when the article has been cited

提交

Tools

Publicity Resources

Practice of Economical Smelting of Q355 Steel in Converter

The Smelting Process Improvement of 120 t Top-Bottom Combined Blown Converter with High-Carbon Turndown and Low Phosphorus Tapping

Optimization and Simulation of Stirring Process for 100 t Electric Arc Furnace Bath and Its Application

Experimental Study on Dephosphorization of X80 Pipeline Steel by Duplex Steelmaking Technology for Combined Blowing Converter

Analysis and Process Practice on Steelmaking Technology of 100 t Top-Blown Oxygen Converter by Limestone for Slag Making

Related Author

Yang Yongkun

Geng Bin

Huang Gaojian

Wei Zehong

Song Huan

Zhan Dongping

Zhang Fudong

Wu Bo

Related Institution

Steelmaking Plant of Baowu Group Echeng Iron and Steel Co.， Ltd

School of Metallurgy， Northeastern University

School of Metallurgical Engineering， Xi’an University of Architecture and Technology

Handan Iron & Steel Group Design institute Co.， Ltd.， HBIS GROUP

No.1Steelmaking Plant ， HBIS GROUP HANSTEEL COMPANY

⁰