Numerical Simulation and Industrial Experiment of Vacuum Arc Remelting <inline-formula><alternatives><math xmlns:mml="http://www.w3.org/1998/Math/MathML" id="M2"><mi>ϕ</mi></math><graphic specific-use="big" xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="alternativeImage/F4FDB249-EBD3-4d39-9658-42B5C8C22C86-M002.jpg"><?fx-imagestate width="3.64066648" height="5.07999992"?></graphic><graphic specific-use="small" xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="alternativeImage/F4FDB249-EBD3-4d39-9658-42B5C8C22C86-M002c.jpg"><?fx-imagestate width="3.64066648" height="5.07999992"?></graphic></alternatives></inline-formula>690 mm Large-sized GH4738 Superalloy Ingot

Zhao Peng; Gui Kaixuan; Qu Jinglong; Yang Shufeng

doi:10.20057/j.1003-8620.2024-00091

您当前的位置：

首页 >

文章列表页 >

Numerical Simulation and Industrial Experiment of Vacuum Arc Remelting

ϕ

690 mm Large-sized GH4738 Superalloy Ingot

Smelting and Solidification | 更新时间：2025-05-09

- Numerical Simulation and Industrial Experiment of Vacuum Arc Remelting $ϕ$ 690 mm Large-sized GH4738 Superalloy Ingot
- Special Steel Vol. 45, Issue 4, Pages: 55-60(2024)
- 作者机构：
  
  1.北京科技大学冶金与生态工程学院，北京 100083
  2.北京科技大学绿色低碳钢铁冶金全国重点实验室，北京 100083
  3.北京钢研高纳科技股份有限公司，北京 100081
- 作者简介：
- 基金信息：
- DOI：10.20057/j.1003-8620.2024-00091
  CLC： TF132
- Received：14 April 2024，
  
  Published：30 July 2024
- 稿件说明：
移动端阅览
赵朋,桂凯璇,曲敬龙等.ϕ690 mm大尺寸GH4738合金真空自耗重熔数值模拟与工业试验[J].特殊钢,2024,45(04):55-60.

Zhao Peng,Gui Kaixuan,Qu Jinglong,et al.Numerical Simulation and Industrial Experiment of Vacuum Arc Remelting ϕ690 mm Large-sized GH4738 Superalloy Ingot[J].Special Steel,2024,45(04):55-60.
赵朋,桂凯璇,曲敬龙等.ϕ690 mm大尺寸GH4738合金真空自耗重熔数值模拟与工业试验[J].特殊钢,2024,45(04):55-60. DOI： 10.20057/j.1003-8620.2024-00091.

Zhao Peng,Gui Kaixuan,Qu Jinglong,et al.Numerical Simulation and Industrial Experiment of Vacuum Arc Remelting ϕ690 mm Large-sized GH4738 Superalloy Ingot[J].Special Steel,2024,45(04):55-60. DOI： 10.20057/j.1003-8620.2024-00091.

Numerical Simulation and Industrial Experiment of Vacuum Arc Remelting

ϕ

690 mm Large-sized GH4738 Superalloy Ingot

PDF Download

摘要

为探究大尺寸高温合金真空自耗重熔工艺，提高铸锭均质化、洁净化水平，采用数值模拟与工业试验相结合的方法，研究了

https://html.publish.founderss.cn/rc-pub/api/common/picture?pictureId=62501508&type=

https://html.publish.founderss.cn/rc-pub/api/common/picture?pictureId=62501522&type=

2.03200006

2.87866688

690 mm锭型GH4738合金真空自耗重熔过程熔池演变、凝固特征以及夹杂物分布规律。结果表明，随着熔炼的进行，模拟的熔池由“浅平”形逐渐向“浅U”形转变，熔炼500 min后，熔池逐渐趋于稳定，冶炼过程最大熔池深度和糊状区宽度分别为200.88、72.38 mm。稳定熔炼期间，铸锭表面和中心的冷却速率分别为0.126、0.009 K/s，高度超过0.4 m后，铸锭冷却速率基本维持稳定。模拟了6种粒径的夹杂物在熔池中的运动轨迹，

20 μm的夹杂物在熔池内作螺旋运动，大部分在熔池表面与铸锭侧壁接触面被捕获，≤10 μm的夹杂物进入熔池后沿熔池底部向内运动，最终停留在铸锭内部，与工业铸锭检测值基本一致。

Abstract

To study the vacuum arc remelting process and improve the homogenization and cleanliness level of large-sized superalloy ingot， numerical simulation and industrial experiment were carried out to investigate the evolution of molten pool， solidification characteristics and inclusion distribution in a

https://html.publish.founderss.cn/rc-pub/api/common/picture?pictureId=62501508&type=

https://html.publish.founderss.cn/rc-pub/api/common/picture?pictureId=62501522&type=

2.03200006

2.87866688

690 mm GH4738 superalloy ingot dur

ing vacuum arc remelting. The results show that as the melting progresses， the simulated molten pool morphology changes from a "shallow flat" shape to a "shallow U " shape. After melting for 500 minutes， the depth of the molten pool and the width of the mushy zone tend to stabilize， with maximum molten pool depth and mushy zone width being 200.88 mm and 72.38 mm respectively. During stable melting， the cooling rate at the surface and center of the casting ingot is 0.126K / s and 0.009 K/s， respectively， and after the height of the ingot is exceeds 0.4 m， the cooling rate of the casting ingot is basically stable.The trajectories of six particle size inclusions in the molten pool were simulated. Large size inclusions （

20 μm） were subjected to the fluid flow and buoyancy to move helically in the molten pool and were eventually trapped at the ingot sidewalls， while small size inclusions （≤10 μm） entered the molten pool and then moved inward along the bottom of the pool， eventually remaining inside the ingot， which is basically consistent with the detection value of the industrial ingot.

关键词

Keywords

references

Semiatin S L ， Fagin P N ， Glavicic M G ， et al . Deformation behavior of Waspaloy at hot-working temperatures ［J］. Scripta Materialia ， 2004 ， 50 （ 5 ）： 625 - 629 .

Xu H ， Yang S F ， Wang E H ， et al . Competitive oxidation behavior of Ni-based superalloy GH4738 at extreme temperature ［J］. International Journal of Minerals， Metallurgy and Materials ， 2024 ， 31 （ 1 ）： 138 - 145 .

谷　雨，杨树峰，赵　朋，等 . 镍基高温合金GH4738的凝固偏析和碳化物析出行为［J］. 中国冶金， 2021 ， 31 （ 7 ）： 13 - 21 .

Chen Z Y ， Yang S F ， Qu J L ， et al . Effects of different melting technologies on the purity of superalloy GH4738 ［J］. Materials ， 2018 ， 11 （ 10 ）： 1838 .

Moyer J M ， Jackman L A ， Adasczik C B ， et al . Advances in triple melting superalloys 718， 706， and 720 ［C］. Superalloys 718， 625， 706 and Various Derivatives （1994） . 1994 ： 39 - 48 .

Loria E A . Recent developments in the progress of superalloy 718 ［J］. JOM ， 1992 ， 44 （ 6 ）： 33 - 36 .

杜金辉，毕中南，曲敬龙 . 三联冶炼GH4169合金研究进展［J］. 金属学报， 2023 ， 59 （ 9 ）： 1159 - 1172 .

赵　朋，杨树峰，杨曙磊，等 . 镍基高温合金均质化冶炼研究进展［J］. 中国冶金， 2021 ， 31 （ 4 ）： 1 - 11 .

王资兴，黄　烁，张北江，等 . 高合金化GH4065镍基变形高温合金点状偏析研究［J］. 金属学报， 2019 ， 55 （ 3 ）： 417 - 426 .

谭海兵，黄　烁，王　静，等 . 白斑缺陷对GH4586合金组织和力学性能的影响［J］. 金属学报， 2020 ， 56 （ 10 ）： 1411 - 1422 .

马亚芬，李育升，张麦仓，等 . 大尺寸优质GH4738合金铸锭的元素偏析规律及均匀化工艺［J］. 材料热处理学报， 2023 ， 44 （ 6 ）： 81 - 89 .

张　勇，李鑫旭，韦　康，等 . 三联熔炼GH4169合金大规格铸锭与棒材元素偏析行为［J］. 金属学报， 2020 ， 56 （ 8 ）： 1123 - 1132 .

Zhao P ， Gu Y ， Yang S F ， et al . Study on the molten pool behavior， solidification structure， and inclusion distribution in an industrial vacuum arc remelted nickel-based superalloy ［J］. Metallurgical and Materials Transactions B ， 2023 ， 54 （ 2 ）： 698 - 711 .

Jardy A ， Ablitzer D . Mathematical modelling of superalloy remelting operations ［J］. Materials Science and Technology ， 2009 ， 25 （ 2 ）： 163 - 169 .

Mitchell A . Recent developments in specialty melting processes ［J］. Materials Technology ， 1994 ， 9 （ 9-10 ）： 201 - 206 .

Davidson P A ， He X ， Lowe A J . Flow transitions in vacuum arc remelting ［J］. Materials Science and Technology ， 2000 ， 16 （ 6 ）： 699 - 711 .

Mitchell A . Progress in understanding clean metal production for IN718 ［C］. Superalloys 718， 625， 706 and Various Derivatives （1994） . 1994 ： 109 - 123 .

Campbell J . A future for vacuum arc remelting and electroslag remelting—a critical perspective ［J］. Metals ， 2023 ， 13 （ 10 ）： 1634 .

王资兴，王　磊，孙文儒 . 熔速对IN718合金真空自耗铸锭组织的影响［J］. 材料热处理学报， 2019 ， 40 （ 1 ）： 91 - 97 .

Views

下载量

CSCD

CNKI被引量

Alert me when the article has been cited

提交

Tools

Publicity Resources

Investigation of Composition Uniformity Control of Low Cost Corrosion Resistant High Strength Stainless Steel

Effect on Fatigue Failure Behavior Induced by Inclusions in GCr15 Bearing Steel Under Different Metallurgical Processes

Numerical Simulation of 80 mm Extra-thick Plate Stacking Slow Cooling for EH420 Marine Steel

Numerical Simulation of Solidification Structure for 4J36 Invar Alloy Ingot

Related Author

Wang Xiaohui

Zhang Xueling

Wang Lin

Liu Zhenbao

Liang Jianxiong

Yang Zhiyong

Tian Shuai

Wang Changjun

Related Institution

Research Institute of Special Steels， Central Iron & Steel Research Institute Co.， Ltd.

NCS Testing Technology Co.， Ltd.

School of Materials， University of Science and Technology Beijing

School of Metallurgy and Ecological Engineering， University of Science and Technology Beijing

Changzhou Baoling Heavy & Industrial Machinery Co.， Ltd.

⁰

Numerical Simulation and Industrial Experiment of Vacuum Arc Remelting ϕ690 mm Large-sized GH4738 Superalloy Ingot

DOI：10.20057/j.1003-8620.2024-00091

摘要

Abstract

关键词

Keywords

references

Numerical Simulation and Industrial Experiment of Vacuum Arc Remelting $ϕ$ 690 mm Large-sized GH4738 Superalloy Ingot