Effect of LF Soft Bubbling Time on Inclusions in Tire Cord Steel LX82 A

Zhao Haoqian; Zhang Yuming; Ma Bo; Gong Yanjie; Meng Yaoqing

doi:10.20057/j.1003-8620.2024-00099

您当前的位置：

首页 >

文章列表页 >

Effect of LF Soft Bubbling Time on Inclusions in Tire Cord Steel LX82 A

Smelting and Solidification | 更新时间：2025-05-09

- Effect of LF Soft Bubbling Time on Inclusions in Tire Cord Steel LX82 A
- Special Steel Vol. 45, Issue 6, Pages: 53-56(2024)
- 作者机构：
  
  1.邢台钢铁有限责任公司技术中心，邢台 054027
  2.河北邢钢科技有限公司，邢台 054799
  3.河北省线材技术创新中心，邢台 054027
  4.武汉科技大学钢铁冶金及资源利用省部共建教育部重点实验室，武汉 430081
- 作者简介：
- 基金信息：
- DOI：10.20057/j.1003-8620.2024-00099
  CLC： TF769.2
- Received：19 April 2024，
  
  Published：30 November 2024
- 稿件说明：
移动端阅览
赵昊乾,张育明,马博等.LF精炼结束后软吹时间对帘线钢LX82 A夹杂物控制的影响[J].特殊钢,2024,45(06):53-56.

Zhao Haoqian,Zhang Yuming,Ma Bo,et al.Effect of LF Soft Bubbling Time on Inclusions in Tire Cord Steel LX82 A[J].Special Steel,2024,45(06):53-56.
赵昊乾,张育明,马博等.LF精炼结束后软吹时间对帘线钢LX82 A夹杂物控制的影响[J].特殊钢,2024,45(06):53-56. DOI： 10.20057/j.1003-8620.2024-00099.

Zhao Haoqian,Zhang Yuming,Ma Bo,et al.Effect of LF Soft Bubbling Time on Inclusions in Tire Cord Steel LX82 A[J].Special Steel,2024,45(06):53-56. DOI： 10.20057/j.1003-8620.2024-00099.

摘要

针对帘线钢夹杂物控制，通常选择长时间软吹处理提高钢水洁净度，但会导致镁碳砖侵蚀加剧。通过工业生产试验，使用FEI Explorer 4自动扫描电镜，研究LF精炼结束后软吹时间对帘线钢盘条夹杂物成分、数量的影响；并采用贝卡标准评分和神户标准Max-T（ave）评分进行盘条夹杂物评价。结果表明，LF精炼结束后软吹时间45 min与软吹时间25 min生产工艺对比，盘条中尺寸大于3 μm的氧化物夹杂成分基本类似，夹杂物密度分别为135个/100 mm

、103个/100 mm

，LF精炼结束后软吹时间25 min工艺夹杂物数量密度略低。扩大对比试验数量，盘条贝卡标准评分和神户标准Max-T（ave）评分表明，LF精炼结束后软吹时间20~25 min的夹杂物控制并未变差或略有改善趋势。帘线钢中低熔点夹杂物的控制主要通过控制Al含量、精炼渣等工艺参数，而导致最终产品失效的夹杂物往往与内生夹杂物类型不一致，对于帘线钢而言，可以考虑降低LF精炼结束后软吹时间。

Abstract

For the control of cord steel inclusion， long time soft bubbling treatment is usually chosen to improve the cleanliness of molten steel， but it will lead to the increased erosion of magnesia-carbon bricks. Through the industrial production test， the effects of soft blowing time after LF refining on the composition and quantity of oxide inclusions of cord steel wire rod were studied by means of FEI Explorer 4 automatic scanning electron microscopy. Becca standard score and Kobe Standard Max-T （ave） score were used to evaluate the inclusion of wire rod. The results showed that the composition of oxide inclusions larger than 3 μm in the wire rod was similar to that in the process of soft blowing time of 45 min and 25 min after LF refining， and the density of inclusions was 135 /100 mm

and 103 /100 mm

， respectively. The density of inclusions in the process of soft blowing time of 25 min after LF refining was slightly lower. Expanding the number of comparison tests， the score of Kobe standard Max-T （ave） and Becca standard indicate that the inclusions control of soft bubbling process for 20-25 min did not become worse or slightly improved. The control of low melting point inclusions in cord steel was mainly through controlling Al content， refining slag and other process parameters， and the inclusions that lead to the failure of the final product are often inconsistent with the types of endogenous inclusions. For cord

steel， it can be considered to reduce the soft blowing time after LF refining.

关键词

Keywords

references

牛　帅，邓　伟，王得炯，等 . 非稳态浇注对帘线钢洁净度的影响［J］. 连铸， 2023 ， 48 （ 1 ）： 74 - 81 .

来永彪，赵阳，左锦中，等 . 钢帘线生产断丝原因分析［J］. 金属制品， 2023 ， 49 （ 1 ）： 52 - 55 .

赵家七，麻　晗，王德永，等 . 碱金属氧化物对帘线钢中夹杂物的影响［J］. 中国冶金， 2023 ， 33 （ 3 ）： 68 - 76 .

毕　胜，王　鑫，陈修君，等 . C82DA帘线钢中TiN夹杂的控制［J］. 特殊钢， 2022 ， 43 （ 4 ）： 46 - 49 .

叶明在，邢耀进，陈　军，等 . 钢包耐火材料对帘线钢82 A夹杂物的影响和工艺改进［J］. 特殊钢， 2022 ， 43 （ 3 ）： 60 - 63 .

杨　文，牛凯军，季　莎，等 . 帘线钢脱氧过程中非金属夹杂物生成热力学［J］. 炼钢， 2020 ， 36 （ 4 ）： 6 - 11+38 .

刘宗辉，秦凤婷 . 钢包MgO-C砖抗氧化剂对帘线钢酸溶铝的影响［J］. 炼钢， 2020 ， 36 （ 5 ）： 69 - 74 .

李桂英，李麦麦 . 钢帘线用钢C82D2盘条拉拔断丝成因分析和工艺改进［J］. 特殊钢， 2021 ， 42 （ 4 ）： 30 - 34 .

郑淑国，朱苗勇 . 吹氩钢液精炼过程气泡去夹杂机理研究［J］. 钢铁， 2008 ， 43 （ 6 ）： 25 - 29 .

赵昊乾，吕洪刚，孟耀青，等 . 高碳硅镇静钢中失效夹杂物检测方法的探讨［J］. 钢铁研究学报， 2019 ， 31 （ 7 ）： 644 - 650 .

Wang K P ， Jiang M ， Wang X H ， et al . Study on formation mechanism of CaO-SiO 2 -based inclusions in saw wire steel ［J］. Metallurgical and Materials Transactions B ， 2017 ， 48 （ 6 ）： 2961 - 2969 .

Arai H ， Matsumoto K ， Shimasaki S I ， et al . Model experiment on inclusion removal by bubble flotation accompanied by particle coagulation in turbulent flow ［J］. ISIJ International ， 2009 ， 49 （ 7 ）： 965 - 974 .

Views

下载量

CSCD

CNKI被引量

Alert me when the article has been cited

提交

Tools

Publicity Resources

Effect on Fatigue Failure Behavior Induced by Inclusions in GCr15 Bearing Steel Under Different Metallurgical Processes

High Temperature Mechanical Properties and Fracture Mechanism of 9Cr-2W-3Co Martensitic Heat-resistant Steel

The Evolution Analysis and Removal of Oxide Inclusion in Tire Cord Steel XLX72 A

The Metallurgical Mechanisms of Inclusions in the FGH4096 Alloy during Electron Beam Refining

Numerical Simulation and Industrial Experiment of Vacuum Arc Remelting

ϕ

690 mm Large-sized GH4738 Superalloy Ingot

Related Author

Wang Zheng

Chen feng

Shi Tao

Yin Qing

Hu Bin

Luo Haiwen

Geng Wei

Zhu Zhibao

Related Institution

Jiangying Xingcheng Special Steel Works Co.， Ltd.， Jiangying

School of Metallurgy and Ecological Engineering， University of Science and Technology Beijing

Changzhou Baoling Heavy & Industrial Machinery Co.， Ltd.

Daye Special Steel Co.， Ltd.

State Key Laboratory of Advanced Refractories， Wuhan University of Science andTechnology

⁰