抚顺特钢高强钢及超高强度钢发展现状

特殊钢 ›› 2021, Vol. 42 ›› Issue (5): 30-35.

抚顺特钢高强钢及超高强度钢发展现状

王飞^1,2，李建新¹，张玉春¹

1. 抚顺特殊钢股份有限公司，抚顺 113001；
2. 宝武特种冶金有限公司，上海 200940

收稿日期:2021-02-28 出版日期:2021-10-01 发布日期:2023-02-02
作者简介:王飞(1989-)，男，硕士(2016年钢铁研究总院/昆明理工大学)，工程师，2013年长春工业大学(本科)毕业，超高强度钢研发和生产。

Development Status for High-Strength Steel and Ultra-High Strength Steels at Fushun Special Steel

Wang Fei^1,2, Li Jianxin¹, Zhang Yuchun¹

1. Fushun Special Steel Co Ltd,Fushun 113001 ；
2. Bao Wu Special Metallurgy Co Ltd,Shanghai 200940

Received:2021-02-28 Published:2021-10-01 Online:2023-02-02

摘要/Abstract

摘要： 基于国内特殊钢冶炼高强钢技术的发展及现状、对抚顺特钢生产的高强钢、超高强度钢及超高强度不锈钢特殊冶炼技术工艺进行简要分析研究。简要介绍了目前抚顺特钢超高强度钢领域典型新材料特殊熔炼技术和制备工艺流程，分析讨论了高品质特殊钢目前工业化生产技术瓶颈及发展现状。

关键词: 超高强度钢, 特殊冶炼技术, 超纯熔炼

Abstract: Based on the development and current situation of domestic special steel smelting technology of high strength steel, the special smelting technology of the high strength steel, ultra-high strength steel and ultra-high strength stainless steel produced at Fushun Special Steel are summarized and analyzed. The typical new material special melting technology and preparation process in the field of ultra-high strength steel at Fushun Special Steel are briefly introduced, and the technology bottleneck and current situation of high quality special steel in industrial production are analyzed and discussed.

Key words: Ultra-High Strength Steel, Special Smelting Technology, Ultra-Pure Smelting

王飞, 李建新, 张玉春. 抚顺特钢高强钢及超高强度钢发展现状[J]. 特殊钢, 2021, 42(5): 30-35.

Wang Fei, Li Jianxin, Zhang Yuchun. Development Status for High-Strength Steel and Ultra-High Strength Steels at Fushun Special Steel[J]. Special Steel, 2021, 42(5): 30-35.

参考文献

[1] 万倫如，许昌養.高强度及超高强度钢[M].北京：机械工业出版社，1988.
[2] 李阿妮，王春旭,刘宪民.二次硬化型超高强度钢的发展[J].材料导报,2007,2(1):13-16.
[3] 钢铁研究总院编译.国外超高强度钢[M].北京:钢铁研究总院， 1992.
[4] Jahazi M. The Influence of Thermomechanical Treatment on the Microstructure and Mechanical Properties of AISI 4130 Steel [J]. Met- all. Mater,1998,4：818.
[5] 罗海文，沈国慧.超高强高切化钢的研究进展和展望[J].金属学报.2020,56(4):494-512.
[6] 李志,赵振业.AennetlOO钢的研究与发展[J].航空材料学报，2006,26(3):265-271.
[7] 李杰，李志,颜鸣皋.高合金超高强度钢的发展[J].材料工程,2007(4):61-65.
[8] 赵振业，李春志，李志，等.探索新机理，创新超高强度轴承齿轮钢[C]//中国工程院化工、冶金与材料工程学部第五届学术会议.海南博鳌：2005：517-521.
[9] Erwin V Zaretskye. Bearing and Gear Steels for Aerospace Applications[R]. [S. I.] :Nasa Tm 102529,1990：30.
[10] Townsend D P, Bomberger E N. Surface Fatigue Life of Carburized and Hardened M50NiI. and AISI 9301 Spur Gear and Rolling-contact Test Barsf R]. Washington DC: Nasa Tm 101979,1989:16.
[11] 赵振业.赵振业院士访谈[J].航空发动机，2009,35(3) : 1-4.
[12] 刘天琦.飞机起落架用材发展[C] //中国航空学会,2007：1-6.
[13] Youngblood J L, Raghavan M. Correlation of Microstructure with Mechanical Properties of 300M Steel [J]. Metallurgical Transactions A,1977,8(9) ：1439-1448.
[14] Dilmore Morris [US] Ruhl man James D [US]. Eglin Steel-a Low Alloy High Strength Composition US 7537727B2[P]. 2009-5-26.
[15] Malakondaiah. G, Srinitlas. M, Rama Rao. P. Ultrahigh-Strength Ix)w-Alloy Steels with Enhanced Fracture Toughness [J]. Progress in Material Science, 1997,42： 209-242.
[16] Zhang K,Zou J,Grosdidier T, et aL Microstructure and Property Modifications of an AISI H13 (4Cr5MoSiV) Steel Induced by Pulsed Electron Beam Treatment [J]. Journal of Vacuum Science & Technology A Vacuum Surfaces & Films,2010,28(6) ： 1349-1355.
[17] Grujicic M. Coherent Precipitation of M2C Carbides in AF1410 Steel [J]. Materials Science and Engineering, 1989,Al 17：215-220.
[18] 李志，古立新，李惠曲，等.23Col4Nil2Cr3MoE(A-100)钢的研究进展[J].航空材料学报,2017,37(6) ： 16-24.
[19] Olson,G. B. ,2013. Ferrium ® M54 ® Overview. QuesTek Innovations LLC, http: //www. questek. com/ferrium-m54. html.
[20] Jeff Grabowski. Ferrium ® M54™ : c A New Fatigue-Resistant, Lower Cost, Ultra-High Strength Steel for [aiding Gear and Arrestment Applications [R]. QuesTek Innovations LLC. Aircraft Airworthiness & Sustainment Conference, April 3,2012.
[21] 王飞，杨卓越,庞学东，等.时效温度对二次硬化超高强度钢 M54力学性能和组织的影响[J].特殊钢,2017,38(6)：67-70.
[22] 王晨充，张弛,杨志刚，等.高Co-Ni 一次硬化钢的设计准则与时效工艺分析[J] .金属学报,2017,53(2)：175-182.
[23] 王飞，张英杰,杨卓越，等.新型二次硬化超高强度钢的高温塑性及热加工图[J].塑性工程学报,2016,23(6)：137-142.
[24] 张英杰,王飞，董鹏，等.M54超高强度钢热塑性行为研究 [J].塑性工程学报,2016,23(3):119-124.
[25] 王飞，张英杰,杨卓越.奥氏体化温度对W、Mo强化超高强度钢强韧性的影响[J].金属热处理,2015,40(7):130-132.
[26] 黎翔.二次硬化钢M54热塑性及热软化抗力研究[D].南昌：江西理工大学,2019.
[27] Decker R F, Eash J T and Goldman A J. 18% Nickel Maraging Steels[J]. Transactions ASM. 1962,55(1):58-76.
[28] Decker R F, Floreens S. Maraging Steel the First 30 Years [A]. Maraging Steel Recent Developments and Applications^ C]. Hunting West Virginia: Hie Minerals, Metals & Materials Society, 1988：1-38.
[29] 1'hariaii K T, Sivakcmar D, Ganesan R, et al. Development of New Nickel, Cobalt Free Maraging Steel [ J ]. Materials Science Technology, 1991 ,7(12)：1082-1088.