ISSN:1003-8620

CN:42-1243/TF

Governed by: CITIC Pacific Special Steel Group Co., LTD

Sponsored by: Daye Special Steel Co., LTD.

Special Steel ›› 2007, Vol. 28 ›› Issue (4): 58-59.

Previous Articles    

Pilot Production of High Pressure Boiler Tube of T91 Steel at Tianjin Pipe Group Corp Ltd

Cu Ligong,  Xiao Congye, Wang GuoLiang   

  1. Tianjin Pipe Croup Corp Ld,Tianjin 300301
  • Received:2007-01-15 Online:2007-07-01 Published:2023-01-07

天津钢管集团股份有限公司T91高压锅炉钢管材的试制

谷立功, 肖功业, 王国亮   

  1. 天津钢管集团股份有限公司,天津300301
  • 作者简介:谷立功(1958-),男,高级工程师,1987年青海职工大学毕业,炼钢工艺和新产品开发。

Abstract: The cold rolled tube φ51 mm×6 mm and φ60 mm×6 mm of T91(10Cr9MolVNb)steel piot produced by gcrap + DRI+ pig iron- 100t UHP EAF-LF(VD)-CCM(EMS) φ210 mm round billet-hot rolling tube φ89 mm×7 mm -cold rolling process at Tianjin Pipe. The continuous cooling transformation curves of overcooling austenite and mechanical properties of produced T91 steel tube were examined. Results showed that due to addition of V(0.20%)and Nb(0.09%)and control of N content in steel(0.032%),the mechanical properties of T91 steel tube at ambient and 200~600 ℃ met to requirement of standard ASME SA-213M.

Key words: T91 Steel, , High Pressure Boiler Tube, , Pilot Production

摘要: 天津钢管集团股份有限公司采用废钢+DRI+生铁-100 t UHP EAF-LF(VD)-CCM(EMS)Φ210 mm圆坯-热轧Φ89 mm×7 mm管-冷轧工艺流程试生产了T91(10Cr9Mo1VNb)钢Φ51 mm×6 mm和Φ60 mm×6 mm冷轧管。测试了所生产的T91钢管过冷奥氏体连续冷却转变曲线和钢管的力学性能。结果表明,由于添加V(0.20%)和Nb(0.09%)并控制钢中N含量(0.032%),使T91钢管的室温和200~600℃力学性能满足ASME SA-213M要求。

关键词: T91钢, 高压锅炉管, 试制