Temperature Prediction of GCr15 Biilet Core Based on Heating Furnace Embedded Thermocouple Experiment

Han Huaibin , Yu Xueqing , Bai Ruijuan , Wang Wei , Wu Siwei , Zhao Xianming

2023, 44 (2): 1-6 doi：10.20057/j.1003-8620.2022-00126

Abstract ( ) PDF (1772KB) ( )

References | Related Articles | Metrics

Numerical Simulation and Process Practice for Solidification and Heat Transfer of Φ800 mm Round Billet Q355NE

Zhou Weiji , Yao Yudong , Liu Jiawei , Yue Feng , Zhang Lei

2023, 44 (2): 7-11 doi：10.20057/j.1003-8620.2022-00132

Abstract ( ) PDF (1388KB) ( )

References | Related Articles | Metrics

Study on Homogenization Process of Super Austenitic Stainless Steel 254SMo

Shi Yongxin , Li Qing , Zhong Qingyuan , Tian Wei , Ye Qiang

2023, 44 (2): 12-16 doi：10.20057/j.1003-8620.2022-00094

Abstract ( ) PDF (1534KB) ( )

References | Related Articles | Metrics

Influence of Cooling Rates on Precipitated σ Phase of 2507 Super Duplex Stainless Steel

Yi Zhonglie , Chen Xingrun , Wei Haixia , Qian Zhangxin , Zhao Dejiang

2023, 44 (2): 17-20 doi：10.20057/j.1003-8620.2022-00114

Abstract ( ) PDF (1078KB) ( )

References | Related Articles | Metrics

Analysis and Process Improvement of Mixed Crystal in Warm Forged 20CrH Inner Star Wheel

Xu Leqian , Zuo Jinzhong , Yuan Jing , Mo Binggan , Wu Wei

2023, 44 (2): 21-24 doi：10.20057/j.1003-8620.2022-00148

Abstract ( ) PDF (1108KB) ( )

References | Related Articles | Metrics

Development of High Strengthening and Toughening TMCP of 40MnVS Steel Round Bars for Direct Cutting Appliction

Ji Ling , Yu Daojun

2023, 44 (2): 25-28 doi：10.20057/j.1003-8620.2022-00016

Abstract ( ) PDF (1300KB) ( )

References | Related Articles | Metrics

Bubble Analysis of Macrostructure of WB36 Thick Wall Seamless Steel Pipe and Process Research

Xia Yunfeng , Zhou Zhongcheng , Hu Yongping , Lin Yu

2023, 44 (2): 29-32 doi：10.20057/j.1003-8620.2022-00127

Abstract ( ) PDF (1175KB) ( )

References | Related Articles | Metrics

Development of Hot-Rolled Wire Rods of 35CrMo Annealing-Free Cold Heading Steel for High-Strength Bolts

Wang Haihua , Zheng Xiaowei , Zhang Jianfeng , Lin Zaiyong , Kong Xiangwei

2023, 44 (2): 33-36 doi：10.20057/j.1003-8620.2022-00075

Abstract ( ) PDF (1192KB) ( )

References | Related Articles | Metrics

Production Practice of Duplex Stainless Steel Wire Rods ER2209 for Welding Application

Li Li , Ji Dengping , Ma Zhenyu , Yan Daocong , Hu Meiqing , Wang Zhenying , Xie Dongxi

2023, 44 (2): 37-42 doi：10.20057/j.1003-8620.2022-00005

Abstract ( ) PDF (1637KB) ( )

References | Related Articles | Metrics

Analysis on Causes of Delamination Defect at 148 mm Heavy Thickness Plate Tail of 2.25Cr-1Mo-0.25V Steel and Control Process

Hou Jingchao , Zhao Guochang , Pang Huiyong , Wu Yanyang , Zhen Guangnan , Zhao Yanqing

2023, 44 (2): 43-47 doi：10.20057/j.1003-8620.2022-00105

Abstract ( ) PDF (1440KB) ( )

References | Related Articles | Metrics

Optimization of Production Process of 16MnCrS5 Steel Bar for Precision Turning

Zhang Guanghong , Long Kaixi , He Yingwu , Xiang Xin

2023, 44 (2): 48-51 doi：10.20057/j.1003-8620.2022-00068

Abstract ( ) PDF (1105KB) ( )

References | Related Articles | Metrics

Experimental Study on Dephosphorization of X80 Pipeline Steel by Duplex Steelmaking Technology for Combined Blowing Converter

Zhao Bin , Zhang Na , Peng Guohong , Wang Chengyi , Wu Wei , Wu Wei

2023, 44 (2): 52-55 doi：10.20057/j.1003-8620.2022-00211

Abstract ( ) PDF (1245KB) ( )

References | Related Articles | Metrics

Comparison and Analysis of Secondary Oxidation Degree in the First Heat of Continuous Casting

Zhang Xin wen , Shi Jiakai , Wang Dewei , Xuan Kangle , Liu Yong , Meng Xiangyan

2023, 44 (2): 56-60 doi：10.20057/j.1003-8620.2022-00103

Abstract ( ) PDF (1232KB) ( )

References | Related Articles | Metrics

Effect Mechanism of Boron on High Temperature Oxidation Properties of Austenitic Stainless Steel

Zeng Li , Wang Bin , Xu Mei , Zhang Wei

2023, 44 (2): 61-64 doi：10.20057/j.1003-8620.2022-00009

Abstract ( ) PDF (1087KB) ( )

References | Related Articles | Metrics

Inner-surface Cracks Analysis and Process Optimization of P92 Seamless Steel Pipe

Zhang Guozhong , Dou Zhichao , Wang Zheng , Min Jie , Huang Dabing

2023, 44 (2): 65-69 doi：10.20057/j.1003-8620.2022-00144

Abstract ( ) PDF (1440KB) ( )

References | Related Articles | Metrics

Effect of Yttrium Content on Microstructure and Texture of 3 % Si Oriented Silicon Steel

Guo Zhihong , Li Xiangjiang , Zheng Yaxu , Zhu Liguang , Sun Huilan , Li Gangwan , Wang Bo , Cao Ruifang

2023, 44 (2): 70-79 doi：10.20057/j.1003-8620.2022-00085

Abstract ( ) PDF (3015KB) ( )

References | Related Articles | Metrics

Effect of Cooling Rate on Mechanical Properties and Microstructure of New C61 Gear Steel

Qi Ming , Liang Xiaodong , Han Dahong , Ren Jianmin , Zhang Zhichao , Wang Xu

2023, 44 (2): 80-83 doi：10.20057/j.1003-8620.2022-00106

Abstract ( ) PDF (1247KB) ( )

References | Related Articles | Metrics

Effect of Cu/Sb/Sn/Mo/W on Structure and Mechanical Properties of New National Standard 09CrCuSb Steel

Zheng Jian , Peng Zhixian , Yuan Yuan , Huang Zhenhua , Yuan Zexi , Liu Jing

2023, 44 (2): 84-89 doi：10.20057/j.1003-8620.2022-00135

Abstract ( ) PDF (1775KB) ( )

References | Related Articles | Metrics

Effect of Solution Treatment Temperature on Microstructure and Properties of Cold Rolled Inconel 601 Nicked-Based Alloy Pipe

Qin Xingwen , Wang Kun , Cai Long , Yang Xiaoping , Ji Huaian

2023, 44 (2): 90-95 doi：10.20057/j.1003-8620.2022-00140

Abstract ( ) PDF (1652KB) ( )

References | Related Articles | Metrics

Effect of Heat Treatment Process on Microstructure and Properties of Fe-Mn-Al-C Steel

Hou Meiling , Li Chenxiao , Kong Xiangwei , Bai Yun

2023, 44 (2): 96-100 doi：10.20057/j.1003-8620.2022-00047

Abstract ( ) PDF (1530KB) ( )

References | Related Articles | Metrics

2023, Vol.44 No.2

Current column

Temperature Prediction of GCr15 Biilet Core Based on Heating Furnace Embedded Thermocouple Experiment

Numerical Simulation and Process Practice for Solidification and Heat Transfer of Φ800 mm Round Billet Q355NE

Study on Homogenization Process of Super Austenitic Stainless Steel 254SMo

Influence of Cooling Rates on Precipitated σ Phase of 2507 Super Duplex Stainless Steel

Analysis and Process Improvement of Mixed Crystal in Warm Forged 20CrH Inner Star Wheel

Development of High Strengthening and Toughening TMCP of 40MnVS Steel Round Bars for Direct Cutting Appliction

Bubble Analysis of Macrostructure of WB36 Thick Wall Seamless Steel Pipe and Process Research

Development of Hot-Rolled Wire Rods of 35CrMo Annealing-Free Cold Heading Steel for High-Strength Bolts

Production Practice of Duplex Stainless Steel Wire Rods ER2209 for Welding Application

Analysis on Causes of Delamination Defect at 148 mm Heavy Thickness Plate Tail of 2.25Cr-1Mo-0.25V Steel and Control Process

Optimization of Production Process of 16MnCrS5 Steel Bar for Precision Turning

Experimental Study on Dephosphorization of X80 Pipeline Steel by Duplex Steelmaking Technology for Combined Blowing Converter

Comparison and Analysis of Secondary Oxidation Degree in the First Heat of Continuous Casting

Effect Mechanism of Boron on High Temperature Oxidation Properties of Austenitic Stainless Steel

Inner-surface Cracks Analysis and Process Optimization of P92 Seamless Steel Pipe

Effect of Yttrium Content on Microstructure and Texture of 3 % Si Oriented Silicon Steel

Effect of Cooling Rate on Mechanical Properties and Microstructure of New C61 Gear Steel

Effect of Cu/Sb/Sn/Mo/W on Structure and Mechanical Properties of New National Standard 09CrCuSb Steel

Effect of Solution Treatment Temperature on Microstructure and Properties of Cold Rolled Inconel 601 Nicked-Based Alloy Pipe

Effect of Heat Treatment Process on Microstructure and Properties of Fe-Mn-Al-C Steel