Effect of Quenching-Tempering Process on Structure and Mechanical Properties of Martensite Stainless Steel 3Cr17Mo

赵亮; 马党参; 刘建华; 陈再枝; 雍岐龙; 戴永年

您当前的位置：

首页 >

文章列表页 >

Effect of Quenching-Tempering Process on Structure and Mechanical Properties of Martensite Stainless Steel 3Cr17Mo

更新时间：2026-01-21

- Effect of Quenching-Tempering Process on Structure and Mechanical Properties of Martensite Stainless Steel 3Cr17Mo
- Special Steel Vol. 27, Issue 2, Pages: 58-60(2006)
- 作者机构：
  
  1. 昆明理工大学,昆明,650093
  2. 钢铁研究总院结构材料研究所,北京,100081
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Received：08 November 2005，
  
  Online First：02 March 2023，
  
  Published：02 March 2006
- 稿件说明：
移动端阅览
赵亮, 马党参, 刘建华, et al. Effect of Quenching-Tempering Process on Structure and Mechanical Properties of Martensite Stainless Steel 3Cr17Mo[J]. Special Steel, 2006, 27(2): 58-60.
DOI：

赵亮, 马党参, 刘建华, et al. Effect of Quenching-Tempering Process on Structure and Mechanical Properties of Martensite Stainless Steel 3Cr17Mo[J]. Special Steel, 2006, 27(2): 58-60. DOI：

摘要

试验研究了960~1140℃淬火、200~650℃回火工艺对成分(%)为0.39C

16.73Cr

1.07Mo

0.25V

0.09Cu的塑料模具用马氏体不锈钢3Cr17Mo组织和力学性能的影响。结果表明

3Cr17Mo钢的淬火组织为板条马氏体+铁素体+(Fe

Cr)

碳化物;经1000~1060℃淬火、260~300℃或550~600℃回火后

3Cr17Mo钢具有良好的综合力学性能。

Abstract

The effect of process of quenching at 960~1140 ℃ and tempering at 200~650 ℃ on martensite stainless steel 3Cr17Mo-0.39C

16.73Cr

1.07Mo

0.25V

0.09Cu for plastics mould has been tested and studied. The results showed that the structure of quenched steel 3Cr17Mo was lath martensite + ferrite +(Fe

Cr)

carbide and with quenching at 1000~1060 ℃ then tempering at 260~300 ℃ or 550~600 ℃ the steel had excellent comprehensive mechanical propertics.

关键词

Keywords

references

Views

下载量

CSCD

CNKI被引量

Alert me when the article has been cited

提交

Tools

Publicity Resources

Effect of Solid Solution Temperature on Structure and Properties of Modified Inconel 718 Alloy

Effect of Patenting Process on Structure and Properties of 70 Steel Wire

Effect of Rolling Process on Structure, Texture and Properties of X80 Pipeline Steel

Effect of Heat Treatment Process on the Microstructure and Properties of 140 ksi Grade In718 Alloy

Nano-Crystalline Ultrafine Grain Materials Produced by Mechanical Alloying

Related Author

吴艳阳

程世长

刘正东

李谦

董述峰

赵刚

叶传龙

鲍思前

Related Institution

河南科技大学材料科学与工程学院

钢铁研究总院

武汉科技大学材料与冶金学院

湖南湘潭钢铁公司钢丝绳厂

内蒙古科技大学材料与冶金学院

⁰