Precipitation Behavior of Rich Copper Phase in 1.18Cu High Purity Steel during Isothermal Aging
|更新时间:2026-01-21
|
Precipitation Behavior of Rich Copper Phase in 1.18Cu High Purity Steel during Isothermal Aging
Special SteelVol. 27, Issue 2, Pages: 20-22(2006)
作者机构:
内蒙古科技大学材料科学与工程学院,包头,014010
作者简介:
基金信息:
DOI:
CLC:
Received:02 September 2005,
Online First:27 February 2023,
Published:27 February 2006
稿件说明:
移动端阅览
安治国, 任慧平, 刘宗昌, et al. Precipitation Behavior of Rich Copper Phase in 1.18Cu High Purity Steel during Isothermal Aging[J]. Special Steel, 2006, 27(2): 20-22.
DOI:
安治国, 任慧平, 刘宗昌, et al. Precipitation Behavior of Rich Copper Phase in 1.18Cu High Purity Steel during Isothermal Aging[J]. Special Steel, 2006, 27(2): 20-22.DOI:
Precipitation Behavior of Rich Copper Phase in 1.18Cu High Purity Steel during Isothermal Aging
The structure and hardncss of contained Cu high purity steel -0.014C
0. 10Mn
0.05Si
1.18Cu
<0.002S
0.006P during isothermnal aging at 650 ℃ for 100 s~300 h have been tested and studied by scanning and high resolution electron microscope and HV50 hardhness tester. The test results showed that with aging at 650 ℃
the rich copper phase particles precipitated prior at ferrite grain boundary
and with increasing isothermal aging time the size of rich copper phase increased. As aging at 650 ℃ for 10' s
the rich copper transient phase kept coherency with ferrite matrix led to maximum hardness value.And during overaging period
the transient phase evolved gradually into fcc e-Cu particle.