Advance on Process Technology of Extra-deep Drawing-Interstitial Atom Free (IF) Sheet Steel

张鹏; 汪凌云; 任正德

您当前的位置：

首页 >

文章列表页 >

Advance on Process Technology of Extra-deep Drawing-Interstitial Atom Free (IF) Sheet Steel

更新时间：2026-01-21

- Advance on Process Technology of Extra-deep Drawing-Interstitial Atom Free (IF) Sheet Steel
- Special Steel Vol. 26, Issue 2, Pages: 1-61(2005)
- 作者机构：
  
  1. 重庆大学材料科学与工程学院,重庆,400044
  2. 重庆科技学院,重庆,400050
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：01 April 2005，
  
  Published：01 April 2005
- 稿件说明：
移动端阅览
张鹏, 汪凌云, 任正德. Advance on Process Technology of Extra-deep Drawing-Interstitial Atom Free (IF) Sheet Steel[J]. Special Steel, 2005, 26(2): 1-61.
DOI：

张鹏, 汪凌云, 任正德. Advance on Process Technology of Extra-deep Drawing-Interstitial Atom Free (IF) Sheet Steel[J]. Special Steel, 2005, 26(2): 1-61. DOI：

摘要

无间隙原子(IF)钢的C、N含量均在30× 10

-6

以下

并用微量Ti(过剩Ti 0.02%～ 0.04% )或Ti-Nb(过剩Nb＜0.02% )合金化以固定钢中残留C和N

使钢成为无间隙原子状态

从而具有优异的深冲性能和非时效性

广泛应用于汽车工业。叙述了IF钢的冶炼和成分控制

热轧

一次和二次冷轧技术

退火工艺;介绍IF钢生产的基础理论研究进展和讨论了IF钢的二次加工脆性、性能的稳定性。

Abstract

As both C and N content in steel are no more than 30×10-6 and the steel is turned into interstitial atom free status by added micro Ti(excess Ti 0.02%~0.04%) or Ti-Nb (excess Nb ＜0.02%) alloying to compound residual C and N in steel

the interstitial atom free(IF)sheet steel has excellent deep drawing properties and non-ageing behavior

it is widely used in auto industry. The steelmaking process and chemical composition control

hot rolling

first and second cold rolling technology and annealing process for the IF steel are summarized

the progress of foundation theories for IF steel production is presented

and the secondary working embrittlement and property stability of IF steel are discussed in this paper.

关键词

Keywords

references

Views

下载量

CSCD

CNKI被引量

Alert me when the article has been cited

提交

Tools

Publicity Resources

Development of Process for Φ55～70 mm Bar of GCr15 Bearing Steel Produced by 220 mm×220 mm Continuous Billet

Analysis on Sticking Defect of CSP Cold Rolled Steel Sheet Annealing in Bell Type Annealing Furnace

Development and Application of Lubrication Technology for Rolling Process

Analysis and Control of White Spots Defect on Strip of 316L Stainless Steel for Tank Container

Annealing Process and Product Characteristics of Baosteel's Semi-process Non-oriented Electrical Steel with Coating

Related Author

池武

计云萍

金自力

王权

张晓燕

任慧平

马艳丽

孙建林

Related Institution

上海交通大学材料科学与工程学院

内蒙古科技大学材料与冶金学院

包钢薄板厂

北京科技大学材料科学与工程学院

宝武集团山西太钢不锈钢股份有限公司冷轧厂

⁰