Theoretical Consideration on Formation and Control of Inclusions in Austenite during Thin Slab Concasting and Continuous Rolling
|更新时间:2026-01-21
|
Theoretical Consideration on Formation and Control of Inclusions in Austenite during Thin Slab Concasting and Continuous Rolling
Special SteelVol. 26, Issue 1, Pages: 1-5(2005)
作者机构:
钢铁研究总院结构材料所,北京,100081
作者简介:
基金信息:
DOI:
CLC:
Received:08 July 2004,
Online First:17 May 2023,
Published:17 May 2005
稿件说明:
移动端阅览
雍岐龙, 孙新军, 刘清友, et al. Theoretical Consideration on Formation and Control of Inclusions in Austenite during Thin Slab Concasting and Continuous Rolling[J]. Special Steel, 2005, 26(1): 1-5.
DOI:
雍岐龙, 孙新军, 刘清友, et al. Theoretical Consideration on Formation and Control of Inclusions in Austenite during Thin Slab Concasting and Continuous Rolling[J]. Special Steel, 2005, 26(1): 1-5.DOI:
Theoretical Consideration on Formation and Control of Inclusions in Austenite during Thin Slab Concasting and Continuous Rolling
According to the solubility product theory of second phase in austenite
Ostward ripening theory
grain size control theory and precipitation strengthening theory
the probability for formation of inclusions in austenite and the inclusion size control have been theoretically analyzed and calculated. The results show that the manganese sulfide inclusion can be controlled to precipitate in austenite with size less than 100 nm while it is difficult at present condition for the alumina inclusions to completely precipitate in solid iron. It is obtained by analysis on the probability of control to reheating austenite grain size and producing precipitate strengthening effect by inclusions in steel that the manganese sulfide precipitated in solid iron can effectively prohibit austenite grain growth in heating and provide somewhat of precipitation strengthening effect.