A Study on Non-Metallic Inclusion in 304 Stainless Steel Produced by Twin Roll Thin Strip Casting
|更新时间:2026-01-21
|
A Study on Non-Metallic Inclusion in 304 Stainless Steel Produced by Twin Roll Thin Strip Casting
Special SteelVol. 28, Issue 4, Pages: 33-35(2007)
作者机构:
1. 北京科技大学冶金与生态工程学院,北京,100083
2. 宝钢集团有限公司技术中心前沿技术研究所,上海,201900
作者简介:
基金信息:
DOI:
CLC:
Received:09 March 2007,
Online First:06 January 2023,
Published:06 January 2007
稿件说明:
移动端阅览
黄福祥, 王盛林, 张炯明, et al. A Study on Non-Metallic Inclusion in 304 Stainless Steel Produced by Twin Roll Thin Strip Casting[J]. Special Steel, 2007, 28(4): 33-35.
DOI:
黄福祥, 王盛林, 张炯明, et al. A Study on Non-Metallic Inclusion in 304 Stainless Steel Produced by Twin Roll Thin Strip Casting[J]. Special Steel, 2007, 28(4): 33-35.DOI:
A Study on Non-Metallic Inclusion in 304 Stainless Steel Produced by Twin Roll Thin Strip Casting
Large inclusions and ultra-fine inclusions in 304 stainless steel thin strip produced by twin roll strip casting have studied by scanning and transmission electron microscope. Results indicated that inclusions in thin strip were spheroidal compound oxide inclusions with ingredient CaO-MnO-Al
2
0
3
-SiO
2
and manganese sulphide inclusion; besides minor 50μm large inclusions
majority of inclusions in thin strip were less than 10 μm fine oxides and sulfides; in contrast to traditional concasting
size of inclusions in thin strip obviously decreased
of which number relatively increased; diameter of inclusions formed in solidification of liquid steel and finally accumulated in grain boundary was mainly less than 0.7 μm.