Effect of Hot Deformation Parameters on Phase Transformation Structure of 0.05C-0.13Nb Steel
|更新时间:2026-01-21
|
Effect of Hot Deformation Parameters on Phase Transformation Structure of 0.05C-0.13Nb Steel
Special SteelVol. 28, Issue 6, Pages: 16-17(2007)
作者机构:
1. 昆明理工大学材料与冶金工程学院,昆明,630091
2. 钢铁研究总院结构材料研究所,北京,100081
作者简介:
基金信息:
DOI:
CLC:
Received:24 May 2007,
Online First:27 December 2022,
Published:27 December 2007
稿件说明:
移动端阅览
阴树标, 刘清友, 张志波, et al. Effect of Hot Deformation Parameters on Phase Transformation Structure of 0.05C-0.13Nb Steel[J]. Special Steel, 2007, 28(6): 16-17.
DOI:
阴树标, 刘清友, 张志波, et al. Effect of Hot Deformation Parameters on Phase Transformation Structure of 0.05C-0.13Nb Steel[J]. Special Steel, 2007, 28(6): 16-17.DOI:
Effect of Hot Deformation Parameters on Phase Transformation Structure of 0.05C-0.13Nb Steel
Phase transformation of 0. 13Nb microalloying low carbon steel with deformation in non-crystallization temperature zone(as deformation≥50%
crystallization occurred)and continuous cooling with cooling rate0.1~50 ℃/s has been studied by using thermecmastor-Z thermal simulation test machine and the effect of thermal deformation parameters on phase transformation structure was analyzed. Results indicated that with deformation in non-crystallization temperature zone
in continuous cooling with cooling rate larger than5℃/s
more than 90% of structure was granular bainite
and at same deformation temperature
with increasing deformation the amount of procutectoid ferite increased and the amount of bainite decreased.