Features of Continuous Cooling Transformation (CCT) of High Carbon Steel 72A for Tyre Core Wire
|更新时间:2026-01-21
|
Features of Continuous Cooling Transformation (CCT) of High Carbon Steel 72A for Tyre Core Wire
Special SteelVol. 29, Issue 5, Pages: 13-15(2008)
作者机构:
1. 武汉科技大学材料与冶金学院,武汉,430081
2. 武汉钢铁集团公司,武汉,430083
作者简介:
基金信息:
DOI:
CLC:
Received:31 March 2008,
Online First:04 January 2023,
Published:04 January 2008
稿件说明:
移动端阅览
王超, 赵刚, 蔡国庆, et al. Features of Continuous Cooling Transformation (CCT) of High Carbon Steel 72A for Tyre Core Wire[J]. Special Steel, 2008, 29(5): 13-15.
DOI:
王超, 赵刚, 蔡国庆, et al. Features of Continuous Cooling Transformation (CCT) of High Carbon Steel 72A for Tyre Core Wire[J]. Special Steel, 2008, 29(5): 13-15.DOI:
Features of Continuous Cooling Transformation (CCT) of High Carbon Steel 72A for Tyre Core Wire
The continuous cooling transformation (CCT) curves of high carbon steel 72A (0.72C
0.53Mn
0.22Si) for tyre core wire has been measured by THERMECMASTOR-Z thermal simulation machine using thermal dilatation method
and the effect of start cooling temperature(840~930℃)and cooling rate(0.8~22 ℃/s)on structure of steel has been analyzed. Results showed that at same start cooling temperature
with increasing cooling rate
the phase transformation period decreased;at same cooling rate
with increasing start cooling temperature
the time reaching the start and end of phase transformation increased; Increasing start cooling temperature was available to increase pearlite percentage content and decrease interlamellar spacing and enhance mechanical properties of wire.