Thermodynamic Calculation and Analysis on Precipitated Phases in Heat-Resistant Steel T91
|更新时间:2026-01-21
|
Thermodynamic Calculation and Analysis on Precipitated Phases in Heat-Resistant Steel T91
Special SteelVol. 29, Issue 3, Pages: 16-18(2008)
作者机构:
1. 北京科技大学冶金与生态工程学院,北京,100083
2. 江阴兴澄特种钢铁有限公司,江阴,214429
作者简介:
基金信息:
DOI:
CLC:
Received:09 November 2007,
Online First:21 December 2022,
Published:21 December 2008
稿件说明:
移动端阅览
郝珊, 李国忠, 王福明, et al. Thermodynamic Calculation and Analysis on Precipitated Phases in Heat-Resistant Steel T91[J]. Special Steel, 2008, 29(3): 16-18.
DOI:
郝珊, 李国忠, 王福明, et al. Thermodynamic Calculation and Analysis on Precipitated Phases in Heat-Resistant Steel T91[J]. Special Steel, 2008, 29(3): 16-18.DOI:
Thermodynamic Calculation and Analysis on Precipitated Phases in Heat-Resistant Steel T91
and MX existing in heat-resistant steel T91 (0.09C
8. 57Cr
0.90Mo
0.19V
0. 08Nb
0.04N) at 600 ~ 1 600 °C have been calculated by Thermo-Calc calculation software. Results show that the main equilibrium precipitated phases in steel T91 at 600 ~ 1 600 ℃ are M23C6 and MX
the initial precipitation temperature for M
23
C
6
is 860 °C and that for MX is 1 200℃ . In MX phase the rich Nb carbonitrides first precipitate then the rich V carbonitrides precipitate. With increasing Nb
V or N
the amount of MX and its equilibrium initial precipitated temperature increases