Effect of Residual Elements Pb,Sn on Surface Quality of Austenite Stainless Steel Bearing Cu
|更新时间:2026-01-21
|
Effect of Residual Elements Pb,Sn on Surface Quality of Austenite Stainless Steel Bearing Cu
Special SteelVol. 29, Issue 5, Pages: 43-44(2008)
作者机构:
太钢不锈钢股份有限公司技术中心,太原,030003
作者简介:
基金信息:
DOI:
CLC:
Received:11 March 2008,
Online First:05 January 2023,
Published:05 January 2008
稿件说明:
移动端阅览
王辉绵, 陈金虎, 张增武, et al. Effect of Residual Elements Pb,Sn on Surface Quality of Austenite Stainless Steel Bearing Cu[J]. Special Steel, 2008, 29(5): 43-44.
DOI:
王辉绵, 陈金虎, 张增武, et al. Effect of Residual Elements Pb,Sn on Surface Quality of Austenite Stainless Steel Bearing Cu[J]. Special Steel, 2008, 29(5): 43-44.DOI:
Effect of Residual Elements Pb,Sn on Surface Quality of Austenite Stainless Steel Bearing Cu
Sn content in austenite stainless steel SUS304HC (≤0.06C
18~19Cr
8~11Ni
2~3Cu) and 201Cu (≤0.08C
7.5~10.0Mn
14~17Cr
4~6Ni
2~3Cu)melting by arc furnace + AOD and convenet + VOD on cracked comer and circular crack of bloom and surface transverse crack of coil
and the source and controlling measures for residual elements have been studied and analyzed. Results showed that as Pb content in steel was more than 0.001% or Sn content in steel was more than 0.011%
the hot plasticity of stainless steel decreased and the trend of crack corner of bloom increased. To control residual elements content in charge is an available measure to decrease Pb
Sn content in steel and increase surface quality of bloom.