Effect of Rolling-Direct Quenching Parameters on Structure and Properties of Ti-B Microalloying Low Carbon Si-Mn Steel
|更新时间:2026-01-21
|
Effect of Rolling-Direct Quenching Parameters on Structure and Properties of Ti-B Microalloying Low Carbon Si-Mn Steel
Special SteelVol. 30, Issue 1, Pages: 60-62(2009)
作者机构:
鞍钢股份有限公司技术中心,鞍山,114001
作者简介:
基金信息:
DOI:
CLC:
Received:02 July 2008,
Online First:30 November 2022,
Published:30 November 2009
稿件说明:
移动端阅览
苏春霞, 王勇, 张起生. Effect of Rolling-Direct Quenching Parameters on Structure and Properties of Ti-B Microalloying Low Carbon Si-Mn Steel[J]. Special Steel, 2009, 30(1): 60-62.
DOI:
苏春霞, 王勇, 张起生. Effect of Rolling-Direct Quenching Parameters on Structure and Properties of Ti-B Microalloying Low Carbon Si-Mn Steel[J]. Special Steel, 2009, 30(1): 60-62.DOI:
Effect of Rolling-Direct Quenching Parameters on Structure and Properties of Ti-B Microalloying Low Carbon Si-Mn Steel
The 24 mm plate of 0. 069r ( Ti + B) microalloying 0. 17C-0.92Si-l. 63Mn steel was rolled by φ500 mm medium-heavy mill in laboratoiy from 135 mm cast slab. The effect of finishing rolling temperature
beginning and finishing water-cooling temperature on structure and mechanical properties of test steel was studied. Results showed that with finishing rolling at 920℃
beginning cooling at 900℃,finishing cooling at 180 ℃
cooling rale 30 ℃/s and with finishing rolling at 880 ℃
beginning cooling at 860℃
finishing cooling at 280 ℃,cooling rate 22 °C/s
the struct Lire ami mechiiiiical properties of steel were equal to that with traditional 880 ℃ for 1 h quenching + 220 ℃ for 6 h tempering process.