Effect of Si Content on Structure and Mechanical Properties of Ultra Supercritical Steam Turbine Rotor Steel 30Cr2Ni4MoV
|更新时间:2026-01-21
|
Effect of Si Content on Structure and Mechanical Properties of Ultra Supercritical Steam Turbine Rotor Steel 30Cr2Ni4MoV
Special SteelVol. 32, Issue 4, Pages: 57-59(2011)
作者机构:
作者简介:
基金信息:
DOI:
CLC:
Received:23 January 2011,
Online First:03 November 2022,
Published:03 November 2011
稿件说明:
移动端阅览
范倚, 范新有, 李士琦, et al. Effect of Si Content on Structure and Mechanical Properties of Ultra Supercritical Steam Turbine Rotor Steel 30Cr2Ni4MoV[J]. Special Steel, 2011, 32(4): 57-59.
DOI:
范倚, 范新有, 李士琦, et al. Effect of Si Content on Structure and Mechanical Properties of Ultra Supercritical Steam Turbine Rotor Steel 30Cr2Ni4MoV[J]. Special Steel, 2011, 32(4): 57-59.DOI:
Effect of Si Content on Structure and Mechanical Properties of Ultra Supercritical Steam Turbine Rotor Steel 30Cr2Ni4MoV
≤0.005Al) is melted by a 10 kg vacuum induction furnace
forged bar treaded at 930 °C air cooling + 900 °C air cooling +640 °C air cooling
then water quenched at 850 ℃ following tempered at 600 ℃. Examination results show that as the Si content in steel increases from 0. 03% to 0. 45%
the amount of martensite in steel increases and the grains become coarser ; and the tensile and yield strength of steel increase respectively from 922 〜936 MPa and 868 〜873 MPa to 1 015 〜1 028 MPa and 950 〜959 MPa
while the average impact energy of steel decreases from 205 J to 154 J.