并利用SPSS(Statistical Product and Service Solutions)软件对实验结果进行方差分析和相关性分析结果表明
电弧炉粉尘TFe含量为47.26%
Zn含量为8.32%;在910~1010℃
使用纯H2对电弧炉粉尘进行精细还原
能实现铁氧化物和锌氧化物分别向MFe和Zn的转变
金属化率和脱锌率分别达到95%、98%左右;同时电弧炉粉尘精细还原的产物未有烧结现象发生。
Abstract
A study on basic characteristics of baked EAF dust including chemical composition
X-ray diffraction detection
and particle-size distribution has been carried out. Based on thermodynamic principles of iron oxide and zinc oxide redaction
the concept of fine reduction of EAF dust is put forward. The effect of temperature (910 ~ 1 010 °C ) and reduction time (2 ~4 h) on ratio of metallization and ratio of de-zinc to EAF dust
and the variance analysis and correlation analysis on test results have been carried out by using Statistical Product and Service Solutions (SPSS) software. Results show that TFe content and Zn content in EAF dust are respectively 47. 26% and 8. 32% ; at 910 ~ 1 010 °C the iron oxide and zinc oxide transforming to MFe and zinc is realized with using pure to fine reduce EAF dust
and the ratio of metallization and ratio of de-zinc are respectively 95% and 98% ; and the phenomenon of sintering EAF dust fine reduction product has not occurred.