Numerical Simulation and Application on Optimization of Flow Control Device in 38 t Expansion Tundish for Casting Slab

张利君; 刘金刚; 宁林新; 解家英

您当前的位置：

首页 >

文章列表页 >

Numerical Simulation and Application on Optimization of Flow Control Device in 38 t Expansion Tundish for Casting Slab

更新时间：2026-01-21

- Numerical Simulation and Application on Optimization of Flow Control Device in 38 t Expansion Tundish for Casting Slab
- Special Steel Vol. 37, Issue 3, Pages: 1-4(2016)
- 作者机构：
  
  首钢技术研究院冶金过程研究所,北京,100043
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Received：25 December 2015，
  
  Online First：02 August 2022，
  
  Published：02 August 2016
- 稿件说明：
移动端阅览
张利君, 刘金刚, 宁林新, et al. Numerical Simulation and Application on Optimization of Flow Control Device in 38 t Expansion Tundish for Casting Slab[J]. Special Steel, 2016, 37(3): 1-4.
DOI：

张利君, 刘金刚, 宁林新, et al. Numerical Simulation and Application on Optimization of Flow Control Device in 38 t Expansion Tundish for Casting Slab[J]. Special Steel, 2016, 37(3): 1-4. DOI：

摘要

通过数值模拟

对钢厂250 mm×2 000 mm板坯连铸原29 t扩容至38 t中间包进行控流装置优化。研究了挡墙、挡坝的个数和位置对中间包内钢液流场及停留时间分布(RTD)曲线的影响

综合考虑了中间包冶金效果及生产成本

为现场提出了稳流器+挡墙+挡坝控流装置的最优设计方案

该方案使中间包活塞区比例达到77.1%

死区比例降至4.2%。现场采用该结构后非稳态浇铸期间生产的管线钢非金属夹杂物合格率由88%提高到95%

明显提高了中间包的冶金功能。

Abstract

The optimization of flow control device in 38 t expansion tundish from original 29 t for casting 250 mm X 2 000 mm slab at steelworks has been carried out by numerical simulation. The effect of number and position of dam and weir on flow field and residual time distribution ( RTD) curves of liquid in tundish has been studied. With comprehensive consideration of tundish metallurgical effect and production cost

the optimum design for control flow devices- current regulator + dam + weir is proposed. With the optimum structure the volume fraction of plug flow region in tundish is up to 77. 1%

the volume fraction of dead region decreases to 4. 2%. With using this structure in situ the qualified ratio of non- metallic inclusions in pipeline steel produced in non-stable casting condition increases to 95% from original 88%

obviously to increase the metallurgical function of tundish.

关键词

Keywords

references

Views

下载量

CSCD

CNKI被引量

Alert me when the article has been cited

提交

Tools

Publicity Resources

Physical and Mathematical Simulation on Flow Control Devices of Tundish for Thin Slab Concaster

Nu merical Simulation of Temperature Field of 304 Stainless Steel Rod and Wire Hot Continuous Rolling

Numeric Simulation of Three-Dimensional Flow Field of Molten Steel in a Mould with High Efficiency Inner and Outer Couple Cooling

Numerical Simulation of Fluid Field of Molten Steel in Mold for 280 mm×380 mm Billet Concasting

Physical and Mathematical Study on Flow Control Device of Tundish for 5-Strand billet Casting at Chongqing Steel

Related Author

薛伟锋

文光华

唐萍

宋超

沈昶

黄社清

史向英

潘远望

Related Institution

(重庆大学材料科学与工程学院，重庆400044) (马鞍山钢铁股份有限公司技术中心，)

太原科技大学工程力学系

辽宁科技大学材料学院

鞍山钢铁集团技术中心

重庆大学材料科学与工程学院

⁰