A Study on Thermal Transmission of Walls of Ladle with Vacuum Shell and Lid

谢剑波; 周建安; 王宝; 雷洪

您当前的位置：

首页 >

文章列表页 >

A Study on Thermal Transmission of Walls of Ladle with Vacuum Shell and Lid

更新时间：2026-01-21

- A Study on Thermal Transmission of Walls of Ladle with Vacuum Shell and Lid
- Special Steel Vol. 38, Issue 3, Pages: 18-22(2017)
- 作者机构：
  
  1. 省部共建耐火材料与冶金国家重点实验室，武汉科技大学,武汉,430081
  2. 省部共建钢铁冶金与资源化教育部重点实验室,武汉科技大学,武汉,430081
  3. 材料电磁过程研究教育部重点实验室，东北大学,沈阳,110004
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Received：05 December 2016，
  
  Online First：19 July 2022，
  
  Published：19 July 2017
- 稿件说明：
移动端阅览
谢剑波, 周建安, 王宝, et al. A Study on Thermal Transmission of Walls of Ladle with Vacuum Shell and Lid[J]. Special Steel, 2017, 38(3): 18-22.
DOI：

谢剑波, 周建安, 王宝, et al. A Study on Thermal Transmission of Walls of Ladle with Vacuum Shell and Lid[J]. Special Steel, 2017, 38(3): 18-22. DOI：

摘要

采用涂有防辐射材料的钢板焊接在传统钢包和钢包盖外壳上

构造出新型带真空壳钢包体减少热损失

并运用真空绝热理论

研究压力（50~10

Pa）对500kg

1873K的钢液温降以及真空壳内综合传热机理的影响。结果表明

30min后

钢包壳和钢包盖真空室的真空绝对压力分别为50Pa和10

Pa时

钢液温降分别为8K和37K;转化对流附加因素值在10

Pa时是在50Pa的200倍;传统钢包绝热层的导热系数是真空壳绝对压力为50Pa时的11倍;工作层耐火材料导热系数是真空压力为50Pa的116倍。因此

新型钢包在低压力下保温作用明显。

Abstract

By using steel plates with radiation-proof material coating welding on conventional ladle exterior shell and lid

a new ladle with vacuum shell is got to reduce heat loss

and the effect of pressure in vacuum chamber (50~10

Pa) on temperature reduction of 1873K 500kg liquid steel and the comprehensive thermal transmission mechanism in vacuum chamber are studied by using vacuum thermal insulation theory. Results show that as the absolute pressure in chamber of ladle shell and lid is respectively 50Pa and 10

Pa for 30min

the temperature drop of liquid in ladle is respectively 8K and 37K

and the conversion convection additional factor value at 10

Pa is 200 times as much as that at 50Pa； the thermal conductivity of insulated layer of conventional ladle is 11 times as much as that of vacuum shell ladle with vacuum chamber absolute pressure 50Pa

and the thermal c

onductivity of working layer refractory materials of conventional ladle is 116 times as much as that new ladle with 50Pa. Therefore

the new ladle with lower pressures in shell has obvious thermal insulation effect.

关键词

Keywords

references

Views

下载量

CSCD

CNKI被引量

Alert me when the article has been cited

提交

Tools

Publicity Resources

Experiment on Optimum Location of Bottom Nozzle in a 130 t Argon Stirred Ladle by Water Model

Commercial Pilot Production of Vanadium Steel SG45 by V2O5 Self-Reducing Direct Alloying in Ladle during 60 t LD Tapping

Related Author

幸伟

倪红卫

沈巧珍

张华

何环宇

宋生强

薛正良

王伟祥

Related Institution

武汉科技大学钢铁冶金及资源利用省部共建教育部重点实验室

石家庄钢铁有限责任公司

⁰