Effect of Slab Mold Feeding RE on Inclusions and Low Temperature Toughness of Steel 30CrMnMo
|更新时间:2026-01-21
|
Effect of Slab Mold Feeding RE on Inclusions and Low Temperature Toughness of Steel 30CrMnMo
Special SteelVol. 38, Issue 5, Pages: 65-67(2017)
作者机构:
1. 海洋装备用金属材料及其应用国家重点实验室,鞍山,114009
2. 鞍钢股份技术中心,鞍山,114009
作者简介:
基金信息:
DOI:
CLC:
Received:27 April 2017,
Online First:18 July 2022,
Published:18 July 2017
稿件说明:
移动端阅览
陈本文, 苏春霞, 赵刚, et al. Effect of Slab Mold Feeding RE on Inclusions and Low Temperature Toughness of Steel 30CrMnMo[J]. Special Steel, 2017, 38(5): 65-67.
DOI:
陈本文, 苏春霞, 赵刚, et al. Effect of Slab Mold Feeding RE on Inclusions and Low Temperature Toughness of Steel 30CrMnMo[J]. Special Steel, 2017, 38(5): 65-67.DOI:
Effect of Slab Mold Feeding RE on Inclusions and Low Temperature Toughness of Steel 30CrMnMo
0.040Als) at both side distance 500 mm from broad face center of 300 mm X 1950 mm slab mold. Analysis results show that the yield of RE is more than 95%
the distribution of RE in steel is uniform
the inclusions in steel is modified and most inclusions are spheroidal; as compared with quenched-tempered non-adding RE steel 30CrMnMo
the impact energy ( KV2) at -40℃ of quenched-tempered 60mm plate steel 30CrMnMo containing 0.017% RE increases from 50.9~56.6 J to 77.6~81.6 J.