Effect of Quenching-Tempering Process on Structure and Mechanical Properties of Martensite Stainless Steel 3Cr17Mo

Special Steel ›› 2006, Vol. 27 ›› Issue (2): 58-60.

Previous Articles Next Articles

Effect of Quenching-Tempering Process on Structure and Mechanical Properties of Martensite Stainless Steel 3Cr17Mo

Zhao liang¹ , Ma Dangshen² , Liu Jianhua² , Chen Zaizhi² , Yong Qilong² , Dai Yongnian¹

1. Kunming University of Science and Technology,Kunming 650093;
2. Institute for Structural Materials,Central Iron and Steel Research Institute,Beijing 100081;

Received:2005-11-08 Online:2006-04-01 Published:2023-03-02

淬回火工艺对马氏体不锈钢3Cr17Mo组织和力学性能的影响

赵亮¹，马党参²，刘建华²，陈再枝²，雍岐龙²，戴永年¹

1. 昆明理工大学，昆明 650093;
2. 钢铁研究总院结构材料研究所，北京 100081;

作者简介:赵亮(1979-)，男，昆明理工大学研究生，从事工模具钢研究。

Abstract

Abstract: The effect of process of quenching at 960~1140 ℃ and tempering at 200~650 ℃ on martensite stainless steel 3Cr17Mo-0.39C,16.73Cr,1.07Mo,0.25V,0.09Cu for plastics mould has been tested and studied. The results showed that the structure of quenched steel 3Cr17Mo was lath martensite + ferrite +(Fe,Cr)₂₃ C₆ carbide and with quenching at 1000~1060 ℃ then tempering at 260~300 ℃ or 550~600 ℃ the steel had excellent comprehensive mechanical propertics.

Key words: Plastic Mould Steels, Martensite Stainless Steel 3Cr17Mo, Quenching-Tempering Heat Treatment, Structure, Properties

摘要： 试验研究了960~1140℃淬火、200~650℃回火工艺对成分(%)为0.39C,16.73Cr,1.07Mo,0.25V,0.09Cu的塑料模具用马氏体不锈钢3Cr17Mo组织和力学性能的影响。结果表明,3Cr17Mo钢的淬火组织为板条马氏体+铁素体+(Fe,Cr)₂₃C₆碳化物;经1000~1060℃淬火、260~300℃或550~600℃回火后,3Cr17Mo钢具有良好的综合力学性能。

关键词: 塑料模具钢, 马氏体不锈钢3Cr17Mo, 淬回火热处理, 组织, 性能

Zhao liang , Ma Dangshen , Liu Jianhua , Chen Zaizhi , Yong Qilong , Dai Yongnian. Effect of Quenching-Tempering Process on Structure and Mechanical Properties of Martensite Stainless Steel 3Cr17Mo[J]. Special Steel, 2006, 27(2): 58-60.

赵亮, 马党参, 刘建华, 陈再枝, 雍岐龙, 戴永年. 淬回火工艺对马氏体不锈钢3Cr17Mo组织和力学性能的影响[J]. 特殊钢, 2006, 27(2): 58-60.

[1]	Meng Qingyong, Shan Qinglin, Pan Hongwei, Lu Boxun, Shi Xiaowei, Wen Juwen. High-temperature Thermoplastic Analysis on High-chromium Weathering Resistant Steel Q350EW [J]. Special Steel, 2024, 45(6): 23-27.
[2]	Zhang　Yanmei, Yu　Haicun, Qiu　Qiuling. Effect of Solid Solution Process on the Organization and Mechanical Properties of 3Al-310S Heat-resistant Steel [J]. Special Steel, 2024, 45(6): 95-101.
[3]	Zhao　Guangdi, Zang　Ximin, Liu　Zhichao, Jing　Yu'an. Influence of Quenching Process on the Microstructure Evolution and Hardness of A514CrQ Rack Steel [J]. Special Steel, 2024, 45(6): 73-82.
[4]	Xu　Linchao, Ye　Sainan, Wang　Wenquan, Zhang　Xinge, Lu　You, Guo　Wei. Effect of Heat Treatment Process on Microstructure and Properties of Forged 430F Ferritic Stainless Steel [J]. Special Steel, 2024, 45(6): 83-87.
[5]	Ma Shaochen, Yuan Zhipeng, Zhang Caijun. Shear Thinning Behavior and Surface Properties of Mold Flux for Thin Thickness Slabs at High-casting Speed [J]. Special Steel, 2024, 45(5): 76-84.
[6]	Yuan lin, Hu Xiaoqiang, Liu Yang, Li Dianzhong, Xie Jing, Chen Wei. Comparative Analysis of 3%Cr Roller Steel by Rare Earth Refining and Electroslag Remelting [J]. Special Steel, 2024, 45(5): 1-7.
[7]	Tang Yuanshou, Zhang Shiqing, Li Fang, He Qinsheng, Zhao Zhen, Wang Hong, Zou Xingzheng, Wang Jianqiao, Huang Yali. Effect of Quenching Temperature on Mechanical Properties of M₆C Reinforced 2 200 MPa Ultra-high Strength Steel [J]. Special Steel, 2024, 45(5): 108-112.
[8]	Zhang Ming. Influence of Microstructure on DWTT Performance of Thin-wall X65M Pipeline Steel [J]. Special Steel, 2024, 45(5): 123-126.
[9]	Xu Yeling, Wang Chong, Hou Xiangyi, Huang Jialiang, Lian Xintong, Huang Shuo. Microstructure and High-temperature Mechanical Properties of Different Positions of Turbine Disc Forgings in GH4706 Superalloy [J]. Special Steel, 2024, 45(5): 102-107.
[10]	Li Qing. Effect of Solid Solution Temperature on Microstructure and Tensile Properties of GH4163 Alloy [J]. Special Steel, 2024, 45(5): 97-101.
[11]	Li Yang, Zhao Guangdi, Zang Ximin, Jiang Haoyuan, Wang Zhaoyu. Effect of Boron on the Microstructure and Strength-Toughness of Fe-Cr-B-C Alloy after Heat Treatment [J]. Special Steel, 2024, 45(5): 25-33.
[12]	Li Jianping, Tang Zhengyou, Zhang Hanwen, Deng Tongwu. The Influence of Si on Microstructure and Mechanical Properties of Hot-Rolled Wire Rods for Cable Steel Wire Ropes [J]. Special Steel, 2024, 45(5): 19-24.
[13]	Yuan Zhizhong, Chen Lu, Zhang Bocheng, Liu Haiming, Niu Zongran , Wang Zhiyuan, Ju Yulin, Cheng Xiaonong. Effects of LB/M Duplex Phase Heat Treatment on Microstructure and Mechanical Properties of Cold Working Die Steel DC53 [J]. Special Steel, 2024, 45(4): 153-160.
[14]	Sun　Zhonghao, Li　Qiang, Zhang　Mingliang, Ma　Chengkuan, Xia　Zhibin, Zhong　Yunbo. Effect of Magnetic-Controlled Electroslag Remelting on Solidification Microstructure and Mechanical Properties of M2 High-speed Steel [J]. Special Steel, 2024, 45(4): 68-76.
[15]	Zhang　Hong, Li Xu, Chen　Hua, Tang　Qing, Li　Linsen, Wang　Li, Gao　Shoulei. Effect of Heat Treatment Process on the Microstructure and Properties of 140 ksi Grade In718 Alloy [J]. Special Steel, 2024, 45(4): 139-145.

Effect of Quenching-Tempering Process on Structure and Mechanical Properties of Martensite Stainless Steel 3Cr17Mo

淬回火工艺对马氏体不锈钢3Cr17Mo组织和力学性能的影响

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments