Comparative Analysis of 3%Cr Roller Steel by Rare Earth Refining and Electroslag Remelting

Yuan lin, Hu Xiaoqiang, Liu Yang, Li Dianzhong, Xie Jing, Chen Wei

2024, 45 (5): 1-7 doi：10.20057/j.1003-8620.2024-00055

Abstract ( ) HTML ( ) PDF (3786KB) ( )

References | Related Articles | Metrics

Effect of Rare Earth Gd on Thermal Deformation Behavior of Ni-Cr-Mo Alloys

Yang Zhihao, Wang Linlin, Liang Tian, Jia Dongxiao, Ma Yingche, Wang Ping

2024, 45 (5): 8-18 doi：10.20057/j.1003-8620.2024-00026

Abstract ( ) HTML ( ) PDF (13170KB) ( )

References | Related Articles | Metrics

The Influence of Si on Microstructure and Mechanical Properties of Hot-Rolled Wire Rods for Cable Steel Wire Ropes

Li Jianping, Tang Zhengyou, Zhang Hanwen, Deng Tongwu

2024, 45 (5): 19-24 doi：10.20057/j.1003-8620.2024-00029

Abstract ( ) HTML ( ) PDF (3119KB) ( )

References | Related Articles | Metrics

Effect of Boron on the Microstructure and Strength-Toughness of Fe-Cr-B-C Alloy after Heat Treatment

Li Yang, Zhao Guangdi, Zang Ximin, Jiang Haoyuan, Wang Zhaoyu

2024, 45 (5): 25-33 doi：10.20057/j.1003-8620.2023-00242

Abstract ( ) HTML ( ) PDF (6946KB) ( )

References | Related Articles | Metrics

The Effect of Nb on Microstructure and Properties of GH4169 Alloy Pipe

Wang Shaobing, Sun Wenqiang, Wang Man, Zhou Zhu, Liu Zhengdong, Zhong Qiang

2024, 45 (5): 34-39 doi：10.20057/j.1003-8620.2023-00224

Abstract ( ) HTML ( ) PDF (1578KB) ( )

References | Related Articles | Metrics

Composition-Structure-Properties and Process Comprehensive Control Technology of 125ksi Super Martensitic Oil Well Pipe Material

Zhao Jiqing, Wan Wuxia, Li Zaoyu, Du Liqing

2024, 45 (5): 40-46 doi：10.20057/j.1003-8620.2023-00262

Abstract ( ) HTML ( ) PDF (2712KB) ( )

References | Related Articles | Metrics

Smelting Process Practice to Improve the Cleanliness and Polishling Proptice of Die Steel

Liu Yong, Zhang Yunfei, Zhao YingLi, Zhao Nan, Zhao Zhengrong, Fan Mingqiang, Tian Zhiqiang

2024, 45 (5): 47-52 doi：10.20057/j.1003-8620.2024-00034

Abstract ( ) HTML ( ) PDF (1487KB) ( )

References | Related Articles | Metrics

Effect of Adding Direct Reduced Iron to EAF on Steelmaking

Xu Peng, Kang Xu, Cao Zhenwei, Wang Qiang, Liu Chong, Nian Baoguo

2024, 45 (5): 53-58 doi：10.20057/j.1003-8620.2024-00095

Abstract ( ) HTML ( ) PDF (630KB) ( )

References | Related Articles | Metrics

Numerical Simulation of Bottom Argon Blowing Process for 130 Ton Ladle

Li Qi, Qiu Guoxing, Wang Gongliang, Gao Peng, Li Rongxiang

2024, 45 (5): 59-65 doi：10.20057/j.1003-8620.2024-00023

Abstract ( ) HTML ( ) PDF (1354KB) ( )

References | Related Articles | Metrics

The Evolution Analysis and Removal of Oxide Inclusion in Tire Cord Steel XLX72 A

Yang Jianhua, Ju Yinjun, Yang Jun

2024, 45 (5): 66-71 doi：10.20057/j.1003-8620.2024-00043

Abstract ( ) HTML ( ) PDF (1299KB) ( )

References | Related Articles | Metrics

Low-cost Non-vacuum Induction Furnace Smelting of High Molybdenum Content of Nickel-base Alloy

Wang Shucai, Guo Jing, Wu Zhilong, Han Kui, Zhao Yue, Chen Xiuqiang

2024, 45 (5): 72-75 doi：10.20057/j.1003-8620.2024-00006

Abstract ( ) HTML ( ) PDF (419KB) ( )

References | Related Articles | Metrics

Shear Thinning Behavior and Surface Properties of Mold Flux for Thin Thickness Slabs at High-casting Speed

Ma Shaochen, Yuan Zhipeng, Zhang Caijun

2024, 45 (5): 76-84 doi：10.20057/j.1003-8620.2024-00082

Abstract ( ) HTML ( ) PDF (1784KB) ( )

References | Related Articles | Metrics

Application and Optimization of Mould Flow Field in 1000 mm-2200 mm Wide Slab Caster

Wang Yuping, Wu Jianbo

2024, 45 (5): 85-89 doi：10.20057/j.1003-8620.2024-00072

Abstract ( ) HTML ( ) PDF (2352KB) ( )

References | Related Articles | Metrics

Ingredient Design of 1Cr13 Stainless Steel Continuous Casting Protective Slag

Zhu Liguang, Song Lei, Wang Xinjuan, Qu Shuo, Yuan Zhipeng

2024, 45 (5): 90-96 doi：10.20057/j.1003-8620.2024-00036

Abstract ( ) HTML ( ) PDF (2651KB) ( )

References | Related Articles | Metrics

Effect of Solid Solution Temperature on Microstructure and Tensile Properties of GH4163 Alloy

Li Qing

2024, 45 (5): 97-101 doi：10.20057/j.1003-8620.2023-00213

Abstract ( ) HTML ( ) PDF (1504KB) ( )

References | Related Articles | Metrics

Microstructure and High-temperature Mechanical Properties of Different Positions of Turbine Disc Forgings in GH4706 Superalloy

Xu Yeling, Wang Chong, Hou Xiangyi, Huang Jialiang, Lian Xintong, Huang Shuo

2024, 45 (5): 102-107 doi：10. 20057/j. 1003-8620. 2024-00004

Abstract ( ) HTML ( ) PDF (3173KB) ( )

References | Related Articles | Metrics

Effect of Quenching Temperature on Mechanical Properties of M₆C Reinforced 2 200 MPa Ultra-high Strength Steel

Tang Yuanshou, Zhang Shiqing, Li Fang, He Qinsheng, Zhao Zhen, Wang Hong, Zou Xingzheng, Wang Jianqiao, Huang Yali

2024, 45 (5): 108-112 doi：10.20057/j.1003-8620.2023-00204

Abstract ( ) HTML ( ) PDF (2805KB) ( )

References | Related Articles | Metrics

Continuous Cooling Phase Transformation Behavior of 40Cr13 Plastic Mold Steel

Su Mengmeng, Chen Wei, Tang Jiali, Zhong Liangmei, Xu Xiangyu, Fu Jianxun

2024, 45 (5): 113-118 doi：10.20057/j.1003-8620.2024-00007

Abstract ( ) HTML ( ) PDF (4466KB) ( )

References | Related Articles | Metrics

Effect of Thread Processing Sequence on Room Temperature Fatigue Performance of A286 Fasteners

Kong Xiangwei , Hou Meiling , Bai Yun , Zhang Jianfeng

2024, 45 (5): 119-122 doi：10.20057/j.1003-8620.2023-00002

Abstract ( ) HTML ( ) PDF (2797KB) ( )

References | Related Articles | Metrics

Influence of Microstructure on DWTT Performance of Thin-wall X65M Pipeline Steel

Zhang Ming

2024, 45 (5): 123-126 doi：10.20057/j.1003-8620.2023-00205

Abstract ( ) HTML ( ) PDF (3723KB) ( )

References | Related Articles | Metrics

2024, Vol.45 No.5

Current column

Comparative Analysis of 3%Cr Roller Steel by Rare Earth Refining and Electroslag Remelting

Effect of Rare Earth Gd on Thermal Deformation Behavior of Ni-Cr-Mo Alloys

The Influence of Si on Microstructure and Mechanical Properties of Hot-Rolled Wire Rods for Cable Steel Wire Ropes

Effect of Boron on the Microstructure and Strength-Toughness of Fe-Cr-B-C Alloy after Heat Treatment

The Effect of Nb on Microstructure and Properties of GH4169 Alloy Pipe

Composition-Structure-Properties and Process Comprehensive Control Technology of 125ksi Super Martensitic Oil Well Pipe Material

Smelting Process Practice to Improve the Cleanliness and Polishling Proptice of Die Steel

Effect of Adding Direct Reduced Iron to EAF on Steelmaking

Numerical Simulation of Bottom Argon Blowing Process for 130 Ton Ladle

The Evolution Analysis and Removal of Oxide Inclusion in Tire Cord Steel XLX72 A

Low-cost Non-vacuum Induction Furnace Smelting of High Molybdenum Content of Nickel-base Alloy

Shear Thinning Behavior and Surface Properties of Mold Flux for Thin Thickness Slabs at High-casting Speed

Application and Optimization of Mould Flow Field in 1000 mm-2200 mm Wide Slab Caster

Ingredient Design of 1Cr13 Stainless Steel Continuous Casting Protective Slag

Effect of Solid Solution Temperature on Microstructure and Tensile Properties of GH4163 Alloy

Microstructure and High-temperature Mechanical Properties of Different Positions of Turbine Disc Forgings in GH4706 Superalloy

Effect of Quenching Temperature on Mechanical Properties of M₆C Reinforced 2 200 MPa Ultra-high Strength Steel

Continuous Cooling Phase Transformation Behavior of 40Cr13 Plastic Mold Steel

Effect of Thread Processing Sequence on Room Temperature Fatigue Performance of A286 Fasteners

Influence of Microstructure on DWTT Performance of Thin-wall X65M Pipeline Steel