A Study on Hot Workability of Corrosion Resistance Alloy G3,G3-Z and 825

Bao Yaozong , Dong Han , Su Jie , Yong Qilong , Wang Lihui , Li Mingzhi

2009, 30 (5): 1-3

Abstract ( ) PDF (490KB) ( )

References | Related Articles | Metrics

Influence of Metal Temperature, Slag Basicity and Initial Si Content on Demanganization of Carbon-Saturated Hot Metal

Li Chuang , Guo Hanjie , Cheng Guoguang

2009, 30 (5): 4-6

Abstract ( ) PDF (431KB) ( )

References | Related Articles | Metrics

Thermodynamic Calculation on Equilibrium Precipitated Phases in Nickel Base Corrosion-Resistant Alloy C-276

Shi Aijuan , Dong Jianxin , Zhang Maicang , Zheng Lei

2009, 30 (5): 7-9

Abstract ( ) PDF (623KB) ( )

References | Related Articles | Metrics

Math Model for Temperature prediction of Heavy Rail during Universal Tandem Rolling Process

Lu Yixuan , Zhao Gang , Ye Chuanlong , Jin Liang , Xiong Jianliang , Dong Maosong

2009, 30 (5): 10-12

Abstract ( ) PDF (420KB) ( )

References | Related Articles | Metrics

A Study on Kinetics of TiO₂ Inclusion Absorbed by Mold Fluxes

Hao Zhanquan , Chen Weiqing , Carsten Lippold, Kim Kwang Seong

2009, 30 (5): 13-15

Abstract ( ) PDF (426KB) ( )

References | Related Articles | Metrics

Behaviour of Thermal Deformation of Steel Cr5 for Cold Working Roll

Li Qian , Cai Dayong , Tang Zhiguo , Liao Bo , Zhu Xuegang

2009, 30 (5): 16-18

Abstract ( ) PDF (623KB) ( )

References | Related Articles | Metrics

Influence of Nozzles Blocking of RH Up-Snorkel on Circulation Flow Rate

Ai Xingang , Bao Yanping , Yue Feng , Cui Heng , Wu Huajie

2009, 30 (5): 19-21

Abstract ( ) PDF (438KB) ( )

References | Related Articles | Metrics

Analysis on Action and Reaction Force between Slab and Rollers at Segment of Dynamic Soft Reduction and Application in Casting

Xie Changchuan, Wang Xinhua , Zhang Jiongming , Li Fushuai , Wang Chaoying , Ai Jian , Jiao Yushui , Chen Maojin

2009, 30 (5): 22-24

Abstract ( ) PDF (743KB) ( )

References | Related Articles | Metrics

Recent Research Status of Production Process for Ultra-High-Strength Pipeline Steel X120

Zhao Yingli , Shi Jie , Bao Yaozong , Xie Gang

2009, 30 (5): 25-27

Abstract ( ) PDF (474KB) ( )

References | Related Articles | Metrics

Calculating Model for Nitriding and Denitriding of Stainless Steel 304 in AOD Refining and Its Application

Shen Chunfei , Jiang Xingyuan , Yin Shiyou , Jiang Zhouhua , Li Yang

2009, 30 (5): 28-30

Abstract ( ) PDF (437KB) ( )

References | Related Articles | Metrics

Effect of Metal Pretreatment-80 t LD-RH-LF-CC Process Flow on Inclusion in Pipeline Steel

Wang Guocheng , Huang Lang

2009, 30 (5): 31-33

Abstract ( ) PDF (729KB) ( )

References | Related Articles | Metrics

Effect of Mold Electromagnetic Stirring on Quality of 0.60C Steel Casting Billets

Chen Wei , Su Hezhou , Jiang Taixu , Shi Zhe

2009, 30 (5): 34-36

Abstract ( ) PDF (761KB) ( )

References | Related Articles | Metrics

Process Practice of a 70 t High Impedance UHP Electric Arc Furnace

Wang Haibing , Su Xiongjie

2009, 30 (5): 37-38

Abstract ( ) PDF (434KB) ( )

Effect of Ca-Si Treatment on Morphology and Ingredient of Sulfide in Free Cutting Non-Quenching-Tempering Steel 30MnVS

Yuan Ting , Li Guozhong , Zhou Xinghai , Tu Yiyou , Jiang Jianqing

2009, 30 (5): 39-41

Abstract ( ) PDF (881KB) ( )

References | Related Articles | Metrics

Effect of Product Thickness on Texture and Magnetic Properties of Non-Oriented Silicon Steel

Dong Aifeng , Miao Xiao , Shen Yi , Zhang Wenkang

2009, 30 (5): 42-44

Abstract ( ) PDF (580KB) ( )

References | Related Articles | Metrics

Analysis on Surface Longitudinal Crack of Concasting Slab of Heat Resistant Stainless Steel 310S and Process Improvement

Li Jun , Li Xiaohong , Fan Xinzhi , Li Guoping

2009, 30 (5): 45-46

Abstract ( ) PDF (354KB) ( )

References | Related Articles | Metrics

Application of Strengthening Melting Technology for an 120 t Converter

Chen Aimei , Li Jiongwei , Qiao Linsuo , Wang Ailan

2009, 30 (5): 47-49

Abstract ( ) PDF (449KB) ( )

References | Related Articles | Metrics

Effect of LF Feeding Si-Ca Wire on Modification of Inclusion in Pipeline Steel X70

Wang Min , Bao Yanping , Liu Jianhua , Li Taiquan

2009, 30 (5): 50-52

Abstract ( ) PDF (602KB) ( )

References | Related Articles | Metrics

Practice for LF(VD) Refining of Medium Carbon Sulfur Free-Cutting Steel

Wang Xiang , Xiao Yang , Yu Maoren , He Yong , Xia Huihua , Zhou Yinghao

2009, 30 (5): 53-54

Abstract ( ) PDF (310KB) ( )

References | Related Articles | Metrics

Analysis on Pencil-Tip Shaped Fracture of Cord Steel 72A during Cold Drawing and Improvement of Process

Meng Xiancheng , Wang Yong , Liu Yazheng

2009, 30 (5): 55-57

Abstract ( ) PDF (1203KB) ( )

References | Related Articles | Metrics

Study on Ultra-Low Carbon Bainite Steel DB800

Chen Zhongwei , Jiang Yamin

2009, 30 (5): 58-59

Abstract ( ) PDF (544KB) ( )

References | Related Articles | Metrics

Continuous Cooling Transformation and Structure Refinement of A Low Carbon High Strength Steel Produced by FTSR

Gao Aimin , Yang Kun , Feng Yunli , Chen Libin

2009, 30 (5): 60-62

Abstract ( ) PDF (1074KB) ( )

References | Related Articles | Metrics

Effect of Cr on Phase Transformation and Structure of 0.035C-0.12Nb X80 Pipeline Steel

Niu Yanlong , Sun Xinjun , Liu Qingyou , Sun Lijun

2009, 30 (5): 63-64

Abstract ( ) PDF (776KB) ( )

References | Related Articles | Metrics

A Study on Recrystallization of Non-Quenched-Tempered Steel 40Mn2V during Thermal Deformation

Fang Jian , Zou Xiyang , Xie Kaiyi , Yuan Zexi

2009, 30 (5): 65-67

Abstract ( ) PDF (421KB) ( )

References | Related Articles | Metrics

Heat Treatment Process and Structure of a Low Carbon Super-high Strength Quenching and Partitioning Steel Plate

Dong Chen , Jiang Haitao , Chen Yulai , Tang Di , Cheng Zhisong

2009, 30 (5): 68-70

Abstract ( ) PDF (672KB) ( )

References | Related Articles | Metrics

2009, Vol.30 No.5

Current column

A Study on Hot Workability of Corrosion Resistance Alloy G3,G3-Z and 825

Influence of Metal Temperature, Slag Basicity and Initial Si Content on Demanganization of Carbon-Saturated Hot Metal

Thermodynamic Calculation on Equilibrium Precipitated Phases in Nickel Base Corrosion-Resistant Alloy C-276

Math Model for Temperature prediction of Heavy Rail during Universal Tandem Rolling Process

A Study on Kinetics of TiO₂ Inclusion Absorbed by Mold Fluxes

Behaviour of Thermal Deformation of Steel Cr5 for Cold Working Roll

Influence of Nozzles Blocking of RH Up-Snorkel on Circulation Flow Rate

Analysis on Action and Reaction Force between Slab and Rollers at Segment of Dynamic Soft Reduction and Application in Casting

Recent Research Status of Production Process for Ultra-High-Strength Pipeline Steel X120

Calculating Model for Nitriding and Denitriding of Stainless Steel 304 in AOD Refining and Its Application

Effect of Metal Pretreatment-80 t LD-RH-LF-CC Process Flow on Inclusion in Pipeline Steel

Effect of Mold Electromagnetic Stirring on Quality of 0.60C Steel Casting Billets

Process Practice of a 70 t High Impedance UHP Electric Arc Furnace

Effect of Ca-Si Treatment on Morphology and Ingredient of Sulfide in Free Cutting Non-Quenching-Tempering Steel 30MnVS

Effect of Product Thickness on Texture and Magnetic Properties of Non-Oriented Silicon Steel

Analysis on Surface Longitudinal Crack of Concasting Slab of Heat Resistant Stainless Steel 310S and Process Improvement

Application of Strengthening Melting Technology for an 120 t Converter

Effect of LF Feeding Si-Ca Wire on Modification of Inclusion in Pipeline Steel X70

Practice for LF(VD) Refining of Medium Carbon Sulfur Free-Cutting Steel

Analysis on Pencil-Tip Shaped Fracture of Cord Steel 72A during Cold Drawing and Improvement of Process

Study on Ultra-Low Carbon Bainite Steel DB800

Continuous Cooling Transformation and Structure Refinement of A Low Carbon High Strength Steel Produced by FTSR

Effect of Cr on Phase Transformation and Structure of 0.035C-0.12Nb X80 Pipeline Steel

A Study on Recrystallization of Non-Quenched-Tempered Steel 40Mn2V during Thermal Deformation

Heat Treatment Process and Structure of a Low Carbon Super-high Strength Quenching and Partitioning Steel Plate