ISSN:1003-8620

CN:42-1243/TF

Governed by: CITIC Pacific Special Steel Group Co., LTD

Sponsored by: Daye Special Steel Co., LTD.

Special Steel ›› 2006, Vol. 27 ›› Issue (3): 11-13.

Previous Articles     Next Articles

Structure and Mechanical Properties of Linepipe Steel X80

Zhang  Xiaoli1,2,Feng  Yaorong1,Zhao  Wenzhen3,Huo   Chunyong1, Zhuang Chuanjing1,Ji Lingkang1, Meng Qiang4   

  1. 1 Tubular Goods Research Institute,CNPC,Xi'an 710065;
    2 Department of Materials and Chemical Engineering,Zhongyuan University of Technology,Zhengzhou 450007;
    3  Materials  and  Science  Engineering,Xi'an  Jiaotong  University,Xi'an  710049;
    4  Xi'an  Shiyou  University,Xi'an  710065
  • Received:2005-12-01 Online:2006-05-08 Published:2023-03-09

X80级管线钢的组织和力学性能

张小立1,2,冯耀荣1,赵文轸3,霍春勇1,庄传晶1,吉玲康1,孟强4   

  1. 1中国石油天然气集团公司管材研究所,西安710065;
    2中原工学院材料与化学工程系,郑州450007;
    3西安交通大学材料科学与工程学院,西安710049;
    4西安石油大学,西安710065
  • 作者简介:张小立(1969-),女,博士后,2004年西安交通大学毕业, 从事粉末冶金难熔金属成型工艺、性能以及管线钢组织 和性能的研究。

Abstract: The  structure,strength  and  impact  toughness  of  linepipe  steel  X80-0.04C,1.87Mn,0.27Mo,0.06Nb,  0.006V,0.017Ti were tested and compared with linepipe steel X70.The exarination results showed that as structure of the linepipe  steel X80 was  acicular  ferrite  +  fine  dispersed bainite,the  steel had better  stength  and toughness,its  tensile strength was up to 750 MPa and ratio of tensile strength to yield strength was nearly up to 0.85,all was high than that of pipeline steel X70.

Key words: Linepipe , Steel , X80,Structure,Mechanical , Properties

摘要: 对成分(%)为:0.04C,1.87Mn,0.27Mo,0.06Nb,0.006V,0.017Ti的X80级管线钢进行了组织和冲击韧性、强度试验,并与X70级管线钢进行对比。试验结果表明,当X80钢的组织为针状铁素体和细小弥散的贝氏体时,该钢有较好的强韧性,抗拉强度达750 MPa,屈强比接近0.85,高于X70级管线钢。

关键词: X80 级管线钢, 组 织 , 力学性能